• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

factory air conditioning system

lsukevinc

Full Member
Joined
Aug 15, 2014
Messages
203
Loc.
Holly Springs
I have the opportunity to pick up a complete a/c system for really cheap from a guy about an hour from home. Has anyone had any luck installing a factory system in a bronco with no a/c? He claims all it needs is a belt for the compressor and new hoses off of the compressor.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
There is no such thing as a factory A/C system in an early Bronco. Every one of them is aftermarket. Even the ones bought new with A/C from a dealer were aftermarket dealer installed A/C units. There is no standard unit or installation method either. Just however they could get them installed and working. Depended on who was doing the install that day as well.
 

Blue Bastard

Bronco Guru
Joined
May 14, 2012
Messages
2,161
Keep in mind that older system was designed for r-12 refrigerant. It may require some updates to use newer available refrigerant.
 

smokinjoe

Bronco Guru
Joined
Jul 8, 2007
Messages
1,139
Loc.
New Braunfels, TX
I have the opportunity to pick up a complete a/c system for really cheap from a guy about an hour from home. Has anyone had any luck installing a factory system in a bronco with no a/c? He claims all it needs is a belt for the compressor and new hoses off of the compressor.

And a new drier too, at the least. But that's cheap (sub $20)

A complete setup should have: compressor, condensor, drier, expansion valve, evaporator, lines.

What am I forgetting here? Personally, I'd go w/ a small modern indash (or underdash unit).
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
The original systems (if you will) that I've see have all been under dash units.

I say it's a crap shoot buying an old system. If the system has been left open (and I'm sure it has) you will need a new compressor and dryer for sure. The other things like the condenser, lines and evaporator will need to be flushed and cleaned. Who know what all has made a home in them over the past 40 years.

Before you buy the unit, make sure the fan and switches work as I don't thin you will fine replacement parts for that.

Tim
 

Stroppe-Envy-77

Bronco Guru
Joined
Jun 15, 2009
Messages
1,011
1. There's no such thing as a "factory a/c system" for an early Bronco.

2. If someone tries to sell you a factory a/c system...see #1. ;D
 

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
i was given a system from someone that pulled it out of his bronco. He said it was working when he pulled it out. He also gave me the mounting bracket. I "WAS" going to use it as onboard air for tires, etc.

will this work?
Thanks
 

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
I've ran a couple of them. The old York compressor usually hold up pretty well. If it's cheap - it's worth a try.

Cool I was hoping it is a York ... HOPEFULLY I can get this thing installed and working ASAP and have a sweet on board air system!
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Most of the old setups were york type. big cast iron and kinda squarish? Its a york. They make fairly good compressors. But many have been using the newer smaller sanden type with good results as well
 
OP
OP
L

lsukevinc

Full Member
Joined
Aug 15, 2014
Messages
203
Loc.
Holly Springs
all valid points. I'm going to look at it at least. I'm not sure of the compressor brand, etc. And I totally forgot about converting it to R134A from R-12.
 
Top