• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

On board air

KyddsPly

Sr. Member
Joined
Nov 30, 2012
Messages
941
What are you running?
Compressor, tanks
Let's hear what everyone is running out there
 

TN1776

Bronco Guru
Joined
Oct 24, 2006
Messages
2,632
I ran a Sanden compressor with the "grease mod" for years, it filled a 2.5 gallon ViAir tank under the body. I used that for airing up my tires, and running my lockers.
The pump moves quite a bit of air, but despite the "mod" it also sent a little grease down the lines too - not a lot but over time it accumulates. On its last trip, I had aired up 6 tires and the pump failed, quite dramatically. It got so hot that I actually thought it was going to start a fire.

I now run the ARB "twin" compressor filling the same underbody tank via a custom braided stainless hose. It actually outperforms the Sanden pump and has built in heat and pressure cut-offs. Simplified the whole system immensely too. It is pricey but so far I am beyond impressed with its capabilities.
 
OP
OP
KyddsPly

KyddsPly

Sr. Member
Joined
Nov 30, 2012
Messages
941
Do you find a 2.5 gallon tank to be enough? It looks you can fit 2 of those under the driver side
 

TN1776

Bronco Guru
Joined
Oct 24, 2006
Messages
2,632
Once you work all of the leaks out of the system, 2.5 gallons at 150psi will run a pair of lockers for a very long time. It is not enough to fill even one 37" tire but it is a little buffer. I always ran the Sanden sparingly... let it cool a little between airing up each tire. Is the tank really needed? Probably not. But it is nice to have... because you know you're going to want an air horn. haha.
 

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
Explorer compressor with a 5 gal portable tank behind back seat. Enough to fill a 35" or run the impact. Love it.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
I do not have one but Oasis makes some killer on board air systems.
Just a bit expensive.
 

allenfahey

Bronco Guru
Joined
Mar 18, 2004
Messages
2,672
I have an Explorer serpentine and found the pump didn't work well with 40's, ram assist, and hydro boost. I made a bracket for my old "P" pump. Since I made that I made s bracket for my York. For air storage I used what was cheapest, a used air tank from a semi mounted under the driver. From that I have a line going yo the front and rear of the Bronco as well as my ARB's.
 

Attachments

  • image.jpg
    image.jpg
    103.4 KB · Views: 346

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
Do you find a 2.5 gallon tank to be enough? It looks you can fit 2 of those under the driver side
I used to run a 2.5g tank ran off a York compressor. That size tank is great for airing up and running lockers, but definitely doesn't have the volume for air tools. You could get a few good blasts on an impact or grinder, but that would exhaust the tank and the pumps are too small to keep up. So choose your uses and tank sizes accordingly.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,110
Started off with a Scuba tank filled at the local dive shop. I could top off a set of 33s easy enough. and I really knew how much air I had since the pressure gauge indicated volume in the tank.

Won a 15# CO2 setup and ran that for a very long time. Could get years out of a fill. I could also empty the tank in a day running power tools rebuilding wasted trailer suspension in a Las Vegas parking lot. My big need wheeling days are not around anymore. Put together a mini 5# CO2 bottle setup. It gets a bit of use and is a lot easier to carry around.
 

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
I used a Viair compressor and a camp fuel tank to have something to run the lockers. Works great, compressor cycles every 10-15 min with the lockers on. I put a line in to the back of the Bronco and installed a coupler so I could plug in under the hood or in the back for air. The compressor is really just for the lockers, it will fill tires but is very slow.

For the tires and air tools I have a CO2 tank mounted in the back with a regulator on it. I have a line set up so I can plug into the back and back-feed air to the lockers if needed or plug into the coupler under the hood with a line to run tools off the bottle. Have maybe $400 in the whole set-up.
 

Attachments

  • IMG_1021.jpg
    IMG_1021.jpg
    96.2 KB · Views: 190
  • IMG_1032.jpg
    IMG_1032.jpg
    106.4 KB · Views: 172
  • IMG_1040.jpg
    IMG_1040.jpg
    98.8 KB · Views: 202
  • IMG_1049.jpg
    IMG_1049.jpg
    90 KB · Views: 203
  • IMG_1048.jpg
    IMG_1048.jpg
    101.4 KB · Views: 209

welndmn

Bronco Guru
Joined
Nov 12, 2001
Messages
2,112
I've used electrics, powertanks and a belt driven units, it's all about how much you want to do.
The fair priced electrics are really only for a "in case I have to" use air.
The fancy ARB and viair have always been out of my price range.
The powertank is awesome because it's portable, filling trailer tores and dragging dead cars out of fields became easier, BUT, it sucks to always drop 20-30$ To get it filled. It's also never full when you need it, I actually have 2 tanks.
You can't bet a belt driven unit, the sanden's are decent little units, but most of us used them because the 5.0's came with them. The Yorks are the work horses but will require you to make a bracket to fit it.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
I've rocked an aluminum powertank for a few years - it was great, I rarely used it on my own stuff, but everyone else sure enjoyed it. Of course I always filled it and I don't remember anyone chipping in - sits in my barn now.

I've got a Vlair setup now with a 2.5 gallon tank in the back - 150 psi is nice but I need more air storage and I plan on moving the tanks under the body. I'll have air, 120v and a welder on my at all times.
 

Dusty

Bronco Guru
Joined
Jun 28, 2001
Messages
2,969
welndmn nailed it. I've used cheap eletrics, power tanks and Yorks. The serpentine-driven York on my 5.8 is by far my favorite. I have a Power Tank on the shelf but never use it. To be fair I've never had one of the nicer electrics like Viair, but I've seen a couple of those burnt up from excessive use when filling a bunch of buddies' tires at the end of a run.
 

00gyrhed

Bronco Guru
Joined
Aug 3, 2006
Messages
2,428
I used the largest ARB compressor that isn't a double. mounted a 5 gallon tank up under the bed. The electric compressor may put out less than using an AC compressor but it is a lot less trouble. The large tank and size of the compressor is a little bit better than "in case I need air" :)

I have a manual override on the compressor so I can force it on with the tank full if I know I am going to need a lot of air, helps some.

The truth of the matter is the YORK is the best way to go but it is a lot more work than an electric. The other compressors are a compromise but serviceable. Hell I ran a 5 ton AC compressor connected to a large Freon tank as my shop air for years before I finally burn up the compressor for lack of oil.

Eclectic is just easier to mount and is probably all you really need. There are a lot of options and some even move quire a bit of air but they will all air up tires and power lockers. Its just a matter of how much time you are willing to spend waiting to air up 4 large tires. If its an every weekend thing that one thing but if its a few times a year spend your money somewhere else and just get an inexpensive electric or a nitrogen or CO2 tank for quick fill.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
I wish I had room for the York and a p-pump with Explorer serp without spending an arm and a leg. My electric setup works, but nothing is quite like a york though.
 

yakelys69

Sr. Member
Joined
Nov 20, 2006
Messages
761
I went with the PUMA 12 VOLT 1.5 GALLON OIL-LESS AIR Compressor. Disassembled the tank from the unit and mounted it where the battery used to be with the tank where the 2nd gas tank was.
 

allenfahey

Bronco Guru
Joined
Mar 18, 2004
Messages
2,672
I wish I had room for the York and a p-pump with Explorer serp without spending an arm and a leg. My electric setup works, but nothing is quite like a york though.

Why won't it fit? It's tight but I had enough room.
 
Top