• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I like the wide open look. If there was a way to run a bow front to back...hmmmmm. :)
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Here are some pics of the quick dirty and cheap.
057e2c3ef2aec4826e51fc6dfcd53305.jpg
ed5e1c88bc5344b191f55c6dcde079a3.jpg
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
It looks 2 piece and stainless?
The allen heads go inta the oem holes?
The small 2nd strip w/about 16 'bump outs' is like the after mrkt co.s make - a place to slide in the edge of the actual 'cloth' top (may B has a thickened edge to jamb/wedge inta that 'groove')?
Thanks for bringin us along for ur build...
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Its two pieces, the brake was not big enough to bend it in one piece. It's not stainless, just plain steel. I tacked a second strip so I could slip the soft top channel in like on a bikini of kayline top. The button heads are in stock holes. No wiper option with this setup. It lowers the windshield appearance and pulls the windshield back lowering its height without a chop. Adds more stress to the hinge though.
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
Full sz windshield?!
"...second strip so I could slip the soft top channel in like on a (rag top)…"
Kouwell.

could U weld a 'cant strip' on the inside of the windshield (not sure what you've done w/the dash) to reinforce it?
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
What bench did you use? 54 - 57 inches long, no?
I've seen some use a Ranger for a modern look but it's a 60/40% type thing...
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
What bench did you use? 54 - 57 inches long, no?
I've seen some use a Ranger for a modern look but it's a 60/40% type thing...

I used a 1968 Mustang bench seat in my halfcab, and in my opinion it is the best choice. It looks stock and fits perfectly. Those seats aren't that hard to find either.
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
The bench in mine is a prp suspension seat 56" wide low back to fit as low as possible without modifying the floor.
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
"Stang! That sounds outta my price range. Even a falcon would B over $300.

Love 2 C what folks came up w/2 fill in the area of "lower floor" on pass side. May B an angle iron frame 2 hold up that lower end?
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
"I will post pics when I get to that part of the project."
OK, great.
Ever C what the oem was equipped with?
I guess the driver's side would B similar if not for the aux fuel tank (option)
/OR/
ability to climb thru to back.
2 storage spots!
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
A Tuffy box tucked under both sides would be sweet huh? %)

One for the valuables, and another for the side arm. :cool:
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
A Tuffy box tucked under both sides would be sweet huh? %)
One for the valuables, and another for the side arm. :cool:

I know which would hold which! 8-0

Ever C what the oem was equipped with? ie the frame under the front bench (bronk)? I've seen the benches, oh 1/2 doz times when guys would tease me w/a potential sale (I wont mention their names - it's been over a 30+ time span) but never the oem frame.
Consider my suggestion (around page #75) on use of the passenger side air box for a side-stack-on-side doubled up optimas battery solution? Build a box, opened on the engine bay side.
Keep em commin.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Consider my suggestion (around page #75) on use of the passenger side air box for a side-stack-on-side doubled up optimas battery solution? Build a box, opened on the engine bay side.
Keep em commin.

Page 75 on this thread? :eek:
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
yeah, forget what yer Q was.
Sh ! t it's a 6 yr long thread, no wonder U can't remember...
Lemmie go look, guess it wasn't helpful
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
can't find it now, don't know how 2 use the search function 4 dat…
not important less U used it…

Still wonderin if U ever saw the frnt bench bronk's frame?
It had a cable under the seat to release/lock so U could adjust the bench for shorter/longer legs...
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
The Mustang bench in my halfcab is all the way back and I am only 5'6....so. Not a lot of wiggle room there, but I love the stock look.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Just a peek at one of my other mods. I should have the brackets welded up and the bumper mounted solid in place tomorrow...if all goes as planned.
 

Attachments

  • back bumper.jpg
    back bumper.jpg
    69.1 KB · Views: 128
Top