• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Let's just say..... Reverting to uncut???

ObscureMachine

Seatbelt Orifice Officer
Joined
Sep 28, 2006
Messages
3,998
Loc.
World Headquarters
If I wanted to go from cut to uncut (because I love LUBERS), what methods and costs are we talking about?

(lots of questions today. Gotta get my build list ready)
 

patterdale

Bronco Guru
Joined
May 24, 2010
Messages
1,252
People on here have found old fenders and cut them to fit back in and others have just bought new ones and installed them. About.the only two options I know of.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Yeah, if you do body work reasonably well it's not one of the hardest jobs out there. As long as you don't have to mess with the tail lamp housing (which is a bear!) you could do it pretty cleanly. Often at the body line, but otherwise up to you.

I thought I'd seen them all the way up and over the top bed rail, but the one we stock is the body seam to wheel opening like this: http://www.wildhorses4x4.com/category/s?keyword=lower+quarter+panel

If you opt to have a body shop do it, I don't know what the pricing might be. Varies I'm sure by region, but also by shop and their willingness to even work on and customize older rigs.

Paul
 

bteutsch

Sr. Member
Joined
Jan 11, 2009
Messages
875
I basically did what you are talking about, except I went from uncut to uncut. The previous owner just beat my rear fenders out to fit over larger tires instead of cutting them out.
47274013af7d3e4aea8c0b0cef1b0736.jpg


6abac1ccabd9cee94d15591a145655f2.jpg


2570dcfba34f90358dd895cb98910e8b.jpg


b7f8953701625fc4a951e6122e6f1649.jpg

37c818d53c9018b8e231c027638d5da9.jpg
 

elan

Sr. Member
Joined
May 27, 2015
Messages
541
Loc.
s
Don't forget the two part epoxy products. So strong the surround metal will tear before the joint gives. No warping or grinding and filling welds.

Body shops use these products all the time. Proper preparation of course is a must.
 

duffymahoney

Contributor
Bronco Guru
Joined
Apr 26, 2015
Messages
2,734
I have some cut outs I would send you. My flare cuts were too large. I am in the middle of this myself. We shall see how good the body work is when its done. I have a 77 so replacing the whole panel wasn't an option with keeping my fuel doors.
 

Attachments

  • IMG_4254.jpg
    IMG_4254.jpg
    143.9 KB · Views: 100

markw

Contributor
Bronco Guru
Joined
Sep 10, 2009
Messages
2,066
Well, having just welded the cutouts back in I'd say replace the quarter panels. It' a lot of time depending on your experience welding sheet metal. I welded mine back in because I had them but if you don't, do the quarter panels.
 

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
Consider post no. 8 Jim. Auto mfg. have mostly went to this technique.
 

1sicbronconut

Contributor
Bronco Guru
Joined
Dec 26, 2006
Messages
2,469
On my current LUBER (was cut) I cut in a inch or so on the original quarter panel, flanged it and glued the new trimmed to fit quarters on. The main reason behind my method was the fact that I wanted to move the wheel opening back a little for better tire clearance at the front of the opening.
 

Attachments

  • 985.jpg
    985.jpg
    117.9 KB · Views: 98
  • 993.jpg
    993.jpg
    96 KB · Views: 115
  • 996.jpg
    996.jpg
    120.4 KB · Views: 125
Top