• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Fitech fuel injection

markatherton

Sponsor/Vendor
Bronco Guru
Joined
Aug 11, 2004
Messages
1,978
I have a customer that wants fuel injection in his bronco. I have been waiting and waiting for Holley to introduce their Sniper, only to see it postponed again. I am now considering a Fitech. I would love to hear from someone who has this system on their bronco .i.e. dificulties with installation, return lines overall impressions etc. Mark in San Diego, Beach City Broncos
 

WHTUAV

New Member
Joined
Jul 17, 2016
Messages
3
I believe a Tech at Wild Horses has one installed on his bronco (James?)
Spoke with him today about installing one on my truck...
 

jmeyer1971

Full Member
Joined
Apr 29, 2012
Messages
215
Get ready to wait my brother is a fit tech dealer and they have been waiting for at least 2 months to get one in to finish this guys rig
 

68stang73

Sr. Member
Joined
Nov 29, 2015
Messages
399
I have the 600hp fitech on my stock 351w. simple install with sherman refi tank. Fired right up and has been for a few months. I don't have any drive time on it yet as i just now installed the body and doing bodywork.
 

DrLathrop

Full Member
Joined
Oct 11, 2009
Messages
297
Loc.
Fulshear, TX
I have the 600hp fitech on my stock 351w. simple install with sherman refi tank. Fired right up and has been for a few months. I don't have any drive time on it yet as i just now installed the body and doing bodywork.

Love my Fitech. Had a qjet before the install & the Fitech starts quickly & runs fantastic. Stay away from the fuel commander & get either the inline pump setup or get a new fuel tank with an in tank pump that will push 58 psi fuel pressure to the tbi. Bolt on to a 4 barrel intake & follow the setup instructions. Will be ordering another setup for my other bronco.
 

jspurl3

Sr. Member
Joined
Dec 30, 2008
Messages
818
Loc.
Baton Rouge, LA
Sorry to hijack Mark, but is anyone running a dual tank setup with an inline pump? If so how are you doing the returns.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Other than variable availability for awhile Mark, you should be pretty good with installing one on a customer's rig I would think.
This unit seems to be less finicky about cam and intake manifold choices, as it's the best running of the three that Justin (that's who you must have spoken to WHTUAV) has tried so far. He's got a big cam on a divided dual plane intake. Not the best combo for any EFI, much less a throttle body.

Whether you decide to use their fuel Command Center or go with a fully plumbed in-tank pump with return lines is up to you, but I would not choose the CC if your customer is going to do much off-roading with it. Unless it's just easy stuff.

Other than that, can't think of any reason not to use one.

Good luck.
And welcome to you too, UAV! Thanks for joining in on the discussion.

Paul
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Oh, and if this engine is building some decent power numbers, and happens to still be using a dual-plane intake, I would either cut down any dividers, or use an open plenum type spacer if hood clearance permits.
Most TBI setups seem to like the wider open spaces of an open plenum. Reduces "issues" that some of them can have.

Not as big a deal on a real stock setup, but it's likely not a bad idea to at least study the phenomenon (if you have no already) if you're going to be the one installing, testing, and then troubleshooting any funky running on your own shop time.

Paul
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,201
Sorry to hijack Mark, but is anyone running a dual tank setup with an inline pump? If so how are you doing the returns.



I am building one right now for a customer that will use the factory tanks. I haven't tested anything yet as pieces are just starting to come back from powder coat etc. Right now I am planning on using the electric tank valve for the returns, running a pump at each tank and T them together with check valves so they cannot backfeed each other. A relay will switch the fuel pump power from the FiTech from main to aux as well as trip the return valve. That's the plan anyway.


Sent from my iPhone using Tapatalk
 

NYLES

Bronco Guru
Joined
Aug 13, 2004
Messages
9,846
Man where was this when I did the Mustang stuff? This is really making me wanna build that 347
 

markw

Contributor
Bronco Guru
Joined
Sep 10, 2009
Messages
2,066
Englewood, when you get that dual tank set up plumbed would you be willing to start a new thread with some pics and wiring diagram? I'm in the same boat as jayspur. That information would be invaluable and hugely appreciated.Thanks, Mark
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
I'm using the inline pump plumbed from a first gen BC tank and the stock fuel line is my return. The aux tank with low pressure electric pump to pump back through the manual valve. Only to be used as a fuel transfer and a manual return shut off (theft deterrent).
Steve
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,201
Englewood, when you get that dual tank set up plumbed would you be willing to start a new thread with some pics and wiring diagram? I'm in the same boat as jayspur. That information would be invaluable and hugely appreciated.Thanks, Mark



I think I could. I will have pics as I go for my customer and when it is done and working I could certainly do a write up.


Sent from my iPhone using Tapatalk
 

MikeKC130J

Full Member
Joined
Dec 27, 2011
Messages
342
Love my Fitech. Had a qjet before the install & the Fitech starts quickly & runs fantastic. Stay away from the fuel commander & get either the inline pump setup or get a new fuel tank with an in tank pump that will push 58 psi fuel pressure to the tbi. Bolt on to a 4 barrel intake & follow the setup instructions. Will be ordering another setup for my other bronco.

Why do you say stay away from the fuel commander? I have the commander and plan on installing it along with the 600hp fitech?
Thanks in advance.
Mike
 

379sinvb

New Member
Joined
Jun 27, 2011
Messages
36
Performing very well on mine. Install was rather easy with only a minor issue on the kickdown for the c6. Try LMC Truck for stock they will tell you in real time if it's in stock or not when you add it to the cart.
img_7178.jpg

img_7198.jpg
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Why do you say stay away from the fuel commander?

He may be referring to the fact that even FiTech says that they're not off-road friendly components. If you don't plan to take the Bronco off the highway, this may not be an issue for you.
Otherwise, I'm pretty sure they've worked out the check-valve issue and one other things that seemed to crop up a few times with members here.
Can't remember the details, but there are a couple of other threads where this is discussed.
But wait for Englewood to chime back in just in case he has a different take on it.

Paul
 
Top