norm02
Full Member
- Joined
- Feb 8, 2016
- Messages
- 336
Hey guys,
I've had my freshly rebuilt motor running a few times but I am chasing down the cause of it not wanting to idle. That being said, as soon as I start it up, (cold start) the temp gauge pegs out.
I'm guessing that either my sending unit is bad or there's an issue in the wiring which is a little on the sketchy side. Before I order a new sending unit I wanted to ask the experts and see if there's something I should check before I buy replacement parts.
Thanks!
I've had my freshly rebuilt motor running a few times but I am chasing down the cause of it not wanting to idle. That being said, as soon as I start it up, (cold start) the temp gauge pegs out.
I'm guessing that either my sending unit is bad or there's an issue in the wiring which is a little on the sketchy side. Before I order a new sending unit I wanted to ask the experts and see if there's something I should check before I buy replacement parts.
Thanks!











