• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

E-brake alternative advice

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
Jump on the MOEB (Missouri Early Broncos) facebook page and send a message to Matt Sheaver. He put an 12v linear actuator on his. He presses a hidden micro switch to set and release it. It's pretty slick. I can't remember where he got, some street rod place I think.
Steve
 

ntsqd

heratic car camper
Joined
Jan 30, 2005
Messages
5,970
Loc.
Upper SoKA
Jump on the MOEB (Missouri Early Broncos) facebook page and send a message to Matt Sheaver. He put an 12v linear actuator on his. He presses a hidden micro switch to set and release it. It's pretty slick. I can't remember where he got, some street rod place I think.
Steve
Trick, but still subject to bleeding down if it pushes on the brake pedal/arm. If it pulls on brake cables you can buy a whole kit to do that from one of the hot rod vendors.

Cadillac Hyd./Mech rear calipers:
http://classicbroncos.com/tech/rear-disc-brakes-cadillacgm-calipers
I've been around a couple sets of these and neither impressed.
 
OP
OP
nickeboy

nickeboy

Contributor
Sr. Member
Joined
Apr 15, 2007
Messages
398
I've seen the solenoid activated ones. Pretty trick for sure. I spoke with chuck at bc Broncos today. He told me what I needed and helped out. I'm going to go for the right way to fix it.
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
If you end up ordering pieces from bc they sell a small to to help adjust the e-brake. Worth the extra couple bucks on the bill.
 
OP
OP
nickeboy

nickeboy

Contributor
Sr. Member
Joined
Apr 15, 2007
Messages
398
HAHA! Thats what I've been using. It takes away some of the appeal to pull up and then jump out and slam a block of wood under the tire.
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
I went high end. I keep one of the rubber tire stops from hf in the back cause I'm too lazy to get under there and adjust it. Was thinking of tying a rope to it so it works from the cab.
 

gotdads68

Full Member
Joined
Jun 17, 2007
Messages
220
^^That's what I was going to suggest. A little modern and spendy but may suit your need.
I wouldn't use a hydraulic style as stated previously, I had a buddy use a Mico lock as a parking brake on his old Willys p/u, something in the system bled off and it rolled down a hill backwards in the middle of the night, totalled it out. :-[
 

ntsqd

heratic car camper
Joined
Jan 30, 2005
Messages
5,970
Loc.
Upper SoKA
Due to some mods and upgrades, I cannot use a standard ebrake. I'm thinking of using a hydraulic brake lock system. Mico makes a lever type. Any issues that I may run into? Have any of you done this?
Can't use std cables where? At the wheels or?
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
Block of wood?

HAHA! Thats what I've been using. It takes away some of the appeal to pull up and then jump out and slam a block of wood under the tire.

"Doggone-it, Roy Gene! How many times do I have to 'splain it to you? When I tell you to put a rock under the wheel, I mean rock! Now look at that, what you have there is no bigger'n a grapefruit."
 
OP
OP
nickeboy

nickeboy

Contributor
Sr. Member
Joined
Apr 15, 2007
Messages
398
That e-stopp is rad! It still wouldn't work with what I have. Now that I know what I have I ordered new calipers and will install them along with a new ebrake cable and I should be fine. Thanks for all the help, this site and community always help.
 
Top