• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Underbody Prepping

pipeline010

Sr. Member
Joined
Nov 15, 2017
Messages
618
Greetings all and thank you in advance for all feedback.

I will soon take ownership of what I believe to be an excellent unrestored Bronco. Sadly, I live in the rusty-est place on the planet, literally. I'm potentially the grim reaper of classic cars.

I live in NJ. I live on a beach island. I live literally on the Bay on the salt marshes (my backyard is a dock). We get a lot of snow in the winter and the authorities respond by spraying salt in every single direction. If I don't have an immediate plan in place to get in front of this rust my new truck will be able to transferred in gallon buckets within 3 years. I need a plan for the day she arrives on the truck.

I'm not a contributor (yet) so here is a link to peek up the girls skirt.

https://drive.google.com/open?id=1MBFbbbBds_5rVpMQqF8emmwNbQEX14FU

I've read countless threads on preparation and rust prevention/treatment and am finally seeking some individualized advice just in case someone can add something new. The rust situation on this island is not an exaggeration. Every year I'll buy new metal handlebars for my classic Schwinn and within 20 days they will show rust and within 60 days they are completely coated.

Frame-off is simply not an option, sorry. Likely some day, but I want/need to drive this thing and a frame-off is, minimum, 4 years off more likely 8.
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,708
Loc.
NH
what he said!! AND reapply every year
 
OP
OP
pipeline010

pipeline010

Sr. Member
Joined
Nov 15, 2017
Messages
618
Thanks fellas.

I actually expected and had planned to DA wheel as much as I could reach, brush the mounts when I fixed the bushings, then maybe phosphoric acid, marine clean, then por-15 (more or less).

Any reason that's a bad route (or is that pretty much what you're telling me to do)? And same treatment with underbody as frame?
 
OP
OP
pipeline010

pipeline010

Sr. Member
Joined
Nov 15, 2017
Messages
618
Oh I see what I did. My own title was misleading.

What I meant was what should my plan be for both the body and the frame. I was overspecific when I said "underbody". Should have said underneath.
 

Blue Bastard

Bronco Guru
Joined
May 14, 2012
Messages
2,161
Thanks fellas.

I actually expected and had planned to DA wheel as much as I could reach, brush the mounts when I fixed the bushings, then maybe phosphoric acid, marine clean, then por-15 (more or less).

Any reason that's a bad route (or is that pretty much what you're telling me to do)? And same treatment with underbody as frame?



That’s the right route, and add a top coat to the por(or equivalent).
Like highlander said, also use fluid film or like substance to help keep your work as long as possible. I do fear for you as old metal will get eaten quick. There are a lot of spot welded panels and cracks and cavity on these old trucks.


Sent from my iPhone using Tapatalk
 
OP
OP
pipeline010

pipeline010

Sr. Member
Joined
Nov 15, 2017
Messages
618
Thanks for advice. I'm a bit obsessive, so I'm confident I can keep her safe as long as I'm doing the right thing from the start.

For the actual body a substance like por-15 is still good? I'm definitely planning to use it on the frame after wheel and Marine Clean.

And what about the steering components (shown in pics), axles, drivetrain, etc. Just clean (and to be crystal clear, when you say clean you mean DA wheel yes?), brush paint, followed up with fluidfilm?

sorry if i'm being dense. thanks.
 

hyghlndr

Contributor
Bronco Guru
Joined
Jan 19, 2009
Messages
5,264
Loc.
Hockessin, Delaware
Get a couple different style wire wheels, pads like this also are really good for flat surfaces.https://www.summitracing.com/parts/tes-07481?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-3m&gclid=Cj0KCQiAtJbTBRDkARIsAIA0a5OnpxrBOP4go5FRS5OUX9dUcUstY53Lr_im488TIY_1uHsSPB8anEUaAtaHEALw_wcB

I have had bad experiences with POR15 trying to stick to clean metal, if the metal is rusty it will stick fine if not you're usually better off with a really good quality paint. POR tends to flake off in big sections on clean metal. Doors also tend to get rusty so I spray fluidfilm up inside the door cavity itself.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
POR = Paint Over Rust
Probably not your best choice for clean rust=free steel.

After removing the rust why not epoxy primer and a tough paint?
 

Joe473

Sr. Member
Joined
Jul 16, 2012
Messages
958
Thanks for advice. I'm a bit obsessive, so I'm confident I can keep her safe as long as I'm doing the right thing from the start.

For the actual body a substance like por-15 is still good? I'm definitely planning to use it on the frame after wheel and Marine Clean.

And what about the steering components (shown in pics), axles, drivetrain, etc. Just clean (and to be crystal clear, when you say clean you mean DA wheel yes?), brush paint, followed up with fluidfilm?

sorry if i'm being dense. thanks.
If you want to keep it rust free and use it in jersey you need to keep it in a garage when not in use and not drive it after first salting in winter. I bring mine back out in march/April after a good rain washes salt off roads.

I'm trying the fluid film also but I pulled my body off. Painted the frame/ underside with KBS then topcoat after removing as much rust as I could.
ecca4c64f24df508fd24bc95e80661a9.jpg
f5502d03deb9efb9118b0c8f896943b8.jpg
67a6812e0a5846da9090da46fa3e4d3c.jpg
09b85e6a3294fd5d3fba89cdf919509b.jpg


Sent from my SM-G900V using Tapatalk
 

Tugross302

Sr. Member
Joined
Jul 7, 2010
Messages
785
Welcome to the 7 month bronco club. When you live in a state where there is snow and salt you don’t get to drive it 5 months per year. Mine stay in the garage til April and it drives me crazy. I don’t envy you with the salt water air though. But I would love to cruise around a beach. With one that looks as solid as yours it would worry me too. I use spray white lithium grease instead of fluid film. No reason. It’s just that I had some already
 

Tugross302

Sr. Member
Joined
Jul 7, 2010
Messages
785
Oh. Another thing I would do is remove all your body mount bolts and put anti-seize along the whole shaft. Then reinstall them. You’ll be glad you did if you ever restore it.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
clean the exposed seams and use a 2 part seam sealer on them before top coating with anything. Ford pretty much didn't seam seal anything on the underside.
 
OP
OP
pipeline010

pipeline010

Sr. Member
Joined
Nov 15, 2017
Messages
618
POR = Paint Over Rust
Probably not your best choice for clean rust=free steel.

After removing the rust why not epoxy primer and a tough paint?

I guess I'm just concerned I won't be able to get at all the crevices to remove all the rust, leaving it to grow beneath the epoxy. Then again I don't want to do a "half and half" where I'm hitting the clean spots with epoxy/paint and jamming por-15 everywhere else. Also, I had planned some floor repairs/replacement in the fall (praying the kick panels are actually clean of rust) and the por-15 would be a hassle for welding....
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
In order for rust to grow it needs bare metal, moisture and oxygen. You pretty much can't get the stuff embedded between the welded seams but you can deprive it of the stuff it needs to grow and reduce or eliminate its ability to grow.
 
OP
OP
pipeline010

pipeline010

Sr. Member
Joined
Nov 15, 2017
Messages
618
everyone thanks for the responses.

Based on what has been said my plan will be this:

Frame - por-15; no wheel. As you can see from the pics it appears the frame has just enough rust to grab the por and I'll put a tough paint coat on top.

Body - pressure wash, simple green, MAYBE ospho if i see some nasty spots, and epoxy/paint[EDIT:weld-through]. Any spots that are exposed will scream at me within a couple months so I'll keep my eyes on those, wheel+ospho it and epoxy/paint as I find them.

Seams - Seam sealer to keep the nasty out.

Fluid Film - I'm going to be pretty aggressive with this stuff, shooting it in inside any holes I see within doors and frame as well. I don't think once/year is going to do it here. FF in spring, checking spots throughout summer, FF again in fall will likely be the exercise.

Drivetrain and Steering components? Not sure yet. I assume more por-15 for the bell housing/axles and clean/epoxy/paint/ff for steering up front.

Found this place it looks amazing. It's what New York State uses for their bus fleets. Too bad it's practically in Canada or I'd make that my once/year rust treatment. Those in NY state may want to try it out.

http://www.carwell.com/rustcopshop.htm
 

Blue Bastard

Bronco Guru
Joined
May 14, 2012
Messages
2,161
I think you hit the frame with a wire wheel lightly and get the loose stuff off.


Sent from my iPhone using Tapatalk
 
OP
OP
pipeline010

pipeline010

Sr. Member
Joined
Nov 15, 2017
Messages
618
thanks BB, I'll do that. I'll do some light removal on frame with the wheel prior to p15.
 

Joe473

Sr. Member
Joined
Jul 16, 2012
Messages
958
thanks BB, I'll do that. I'll do some light removal on frame with the wheel prior to p15.
Read the directions if you use POR or KBS. Both of them need a very clean surface and a prep treatment. Skip these steps and adhesion/sealing ability will suffer.

Good luck, there are a few of us in Jersey that share your struggle with salt roads and salt air.

Sent from my SM-G900V using Tapatalk
 

NashBronco

Contributor
Sr. Member
Joined
May 9, 2013
Messages
398
Loc.
Flowood, MS
I would agree about reading instructions with POR. I didn't have much luck with it and I read the directions. I use Eastwood Rust Encapsulator and highly recommend it. Much easier prep process and I have had excellent results.
 
Top