• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Fuse Box Question

1strodeo

Contributor
Squirrel Watcher
Joined
Sep 15, 2016
Messages
3,600
Loc.
Wisconsin
I opened my glove box to snap a pic of the VIN, and not sure why I hadn't noticed before, but I'm face to face with the fuse box! just kinda hangin out, so I go into the manual and it has conflicting info it seems, one page says its mounted above right of gas pedal (like my 66) and another page says it's mounted in the glove box??

There are 2 holes for the fuse box above the gas pedal, so I'm thinking this is just where the PO had the fuse box tucked away.

For the record I basically bought someone else's project and never got to speak to them about it so just been figuring out what he did and did not do (like NOT torquing the U bolts %))

will post pics shortly
 

Attachments

  • 9B1ACA65-5C1A-4A56-A976-F34511928612.jpg
    9B1ACA65-5C1A-4A56-A976-F34511928612.jpg
    97 KB · Views: 120
  • FFB96A69-A4C7-45FE-966A-2A8A9B361667.jpg
    FFB96A69-A4C7-45FE-966A-2A8A9B361667.jpg
    62.6 KB · Views: 86
  • 6251FAB8-B965-4702-9CB4-C04E3D3B6DAA.jpg
    6251FAB8-B965-4702-9CB4-C04E3D3B6DAA.jpg
    102.7 KB · Views: 93

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
On my 71 that still has the cardboard like paper liner, the fuse box is mounted right there on the left side (as looking in the glove box) and withe fuse face facing towards the passenger side of the box.
 
OP
OP
1strodeo

1strodeo

Contributor
Squirrel Watcher
Joined
Sep 15, 2016
Messages
3,600
Loc.
Wisconsin
So I should have an actual metal glove box? My 66 only has the liner, and my former 66 (Mustang) had the same thing...this 72 has nothing but a glove box door, thanks -Jeff
 

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
I know the fuse box is in the glove box on my 71', and I'm pretty sure it's paper. I never get in there for anything and can't remember for sure lol.
 
OP
OP
1strodeo

1strodeo

Contributor
Squirrel Watcher
Joined
Sep 15, 2016
Messages
3,600
Loc.
Wisconsin
Oh, i've always been under the impression the fuse box had to be grounded to metal
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
I know the fuse box is in the glove box on my 71', and I'm pretty sure it's paper. I never get in there for anything and can't remember for sure lol.

lol, opened mine up and fuse box is laying there with no liner%)
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Oh, i've always been under the impression the fuse box had to be grounded to metal

No need or reason to ground the fuse panels on any rig of this vintage. They might no newer vehicles to keep RF down in some way, but I've never seen one on any later model I've messed with either.

All EB's had the same two locations. From '66 to '70 the fuse panel was on the firewall by the driver's right foot. From '71 to '77 it was in the glove box. As said, all EB's had a paper/cardboard liner.
The official wiring diagrams show the '71 as having the same early design harness, but I've yet to see a 70 with the newer style, or a '71 with the older style. So not sure if there was a mid-year transition or not.

Originally there would also have been a snap-on plastic cover over the fuses on the later models, to keep errant loose 30.06 bullets from coming in contact when bouncing over rough terrain! Or just anything conductive in general kept off of the fuse panel would be considered a good safety practice.
But the two little flimsy pairs of legs/feet that held the cover on by slipping over a fuses glass section were not long for this world. Most were damaged by the time their rigs were 5 years old or less. A few more years and they were useless.
I'm guessing with all the restorations, and all the available Chinese manufacturers, we may even see reproductions of these covers soon.
Unless they're already out there?

Paul
 
Top