• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

WH headers?

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
The regular GT40 heads themselves are no problem. The GT40P heads however do have plug wire proximity issues on at least one, if not two cylinders.

For the transmission, it's "hit" or miss (pun intended) with the 4R70.
We've sold quite a few with no issue, but if I remember there are at least three or four members here that did in fact have a slight interference issue. I think it was at or near the bellhousing flange on the passenger side maybe?

There are some threads about it here, so someone should be able to post a link. I don't have it saved unfortunately.

Hope that helps.

Paul
 

67 Halfcab

Full Member
Joined
Nov 20, 2011
Messages
251
I'm one of the ones with a "slight" interference problem with the 4R70W. The flange was hitting the bell housing and I wasn't able to tighten the header all the way to the head.

EDIT: After rereading my original post I can see where it appears I was bashing Wild Horses. This was not my intent. I Only wanted to show the OP my fitment issues. For this engine/transmission combo it appears to be a "hit and rarely miss" fitment, with (of coarse with my luck) mine being a miss. Don't hesitate to buy part from Wild Horses, I don't.


For posterity I'll add: stock '89 Mustang 5.0 mated to a '99 Mountaineer 4R70W.
 

Attachments

  • DSCN2793.jpg
    DSCN2793.jpg
    52.5 KB · Views: 114
Last edited:

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
to bad you cant get the header at least bolted down to the head good. If you could Id suggest to try and pry the header flange off the tranny with a block of wood.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Is that what you were told 67? Including not being able to return them?
Doesn't sound right to me. Having said that, I sure hope it wasn't me that said it!

Not our normal policy either, except under other extenuating circumstances. Such as having modified them to fit already or something like that. And it's obviously a pretty hard hit in your case. Including being right by the dipstick/fill tube anyway.
Would take a good bit of strong-arm to get that to clear.

Or was the negative response something to do with trying another set? If that's the case I can see us not wanting to throw a second set at the problem, knowing pretty well that they'd likely fit the same way.

Sorry you were treated that way no matter what. Do you still have them? If so let's see if there's still something to do about it.

Paul
 

67 Halfcab

Full Member
Joined
Nov 20, 2011
Messages
251
Is that what you were told 67? Including not being able to return them?
Doesn't sound right to me. Having said that, I sure hope it wasn't me that said it!

Not our normal policy either, except under other extenuating circumstances. Such as having modified them to fit already or something like that. And it's obviously a pretty hard hit in your case. Including being right by the dipstick/fill tube anyway.
Would take a good bit of strong-arm to get that to clear.

Or was the negative response something to do with trying another set? If that's the case I can see us not wanting to throw a second set at the problem, knowing pretty well that they'd likely fit the same way.

Sorry you were treated that way no matter what. Do you still have them? If so let's see if there's still something to do about it.

Paul

Don't worry Paul, it wasn't you I spoke with on the phone. Maybe the sales rep I spoke with (not going to mention their name in this thread) was in the middle of a bad day. I ended up buying a set of used factory manifolds.

Thanks for reaching out!
 

WILDHORSES

Sponsor/Vendor
Bronco Guru
Joined
Nov 7, 2003
Messages
2,253
Loc.
USA
When I called and tried to get them swapped out I was basically told that there was no way my problem could be happening and that I was SOL.

I have 6-7 dudes that could of taken that call. Someone needs to spend some time at my re-education class. I'm as surprised as Paul. I will only say I can't fix the problem without help. 67 if you would be kind enough to PM me what day you called with your name and phone number this will get taken care of. There is no reason we can't take those headers back and give you a full refund.

Jim
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Jim and Paul are such f'n "stand-up" guys.

They are a large part of the reason that I am so happy to be part of the eb family/community.
 

Jolly Roger

Full Member
Joined
Sep 30, 2013
Messages
157
I'm just getting starting on my frame up project and the response's from DirtDonk and Wildhorses concerning 67 halfcab's problem are confirmation that they are a company I would like to give business to. First class customer service guys.
 

67 Halfcab

Full Member
Joined
Nov 20, 2011
Messages
251
I wanted to give everyone an update after both Paul and Jim reached out to me. Even though these headers were purchased in October 2015, Jim has offered to take care of the matter. Just another example of how the Early Bronco world is filled with awesome people!

Thanks again, Jim and Paul!

Jamie
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Got family in Little Rock, Pine Bluff and around Yell county I've never met.
Wouldn't be too hard to convince me to spend some time someday.

I like the idea of CO and WY, but might have to detour to Moab to check out the prospects there.
Used to be too seasonal, but thinking that's not the case so much anymore?

Mobile warehouse?;)

Paul
 
Top