Ironlung1948
New Member
- Joined
- Dec 30, 2018
- Messages
- 26
Hello folks. I'd like to start by professing my ignorance on the topic but I have a dana 30 that im taking apart. I cant seem to figure out how to remove the knuckle . I was able to identify the 4 bolts on the top and bottom of the knuckle are termed 'king pins' but i cant seem to figure out what they are for or how to remove them. I initially thought the metal plate was rusted to the knuckle so I started banging on it with a chisel until I released it was shimmed in there but I still did not get it to lift up. I presume that removing them is the only way to access the ball joints? Yelp











