• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Blueprint Accessory Drive

JR12345

New Member
Joined
Mar 17, 2019
Messages
5
Loc.
Montrose, MI
Hi all I've been lurking around here for the last few months getting answers to all my questions for a 73 we are doing frame off. Looking at running vintage air, has anyone looked into the accessory drives that Blueprint sells?
https://blueprintengines.com/produc...s-wp-ac-brackets-bolts?variant=13901075808322
I'm getting ready to call them and ask some questions but thought someone here might already know if these will fit?
Thanks for the answers to the 800 questions I have already found!
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Hey JR, welcome!
Don't have an answer, and haven't even looked at what Blueprint is offering yet. But will now that I know they have something.
As I'm sure you've seen already (and will no doubt be mentioned here) the most popular accessory drive setup by far is the Ford Explorer.
Not that it's the coolest looking (though it's not bad) or the most versatile (bug again, not bad) but it sure makes some maintenance procedures easier and, the most important reason for most of us, offers the most clearance from it's very low profile.
And Broncos need all of that extra they can get!

Many (most?) aftermarket drive systems assume that space is unlimited and design accordingly.

Good luck. Look forward to the answers you get regarding Blueprint.

Paul
 
OP
OP
J

JR12345

New Member
Joined
Mar 17, 2019
Messages
5
Loc.
Montrose, MI
Thanks.
I kept reading about explorer systems thinking people were grabbing them off explorers at the junk yard, are aftermarket setups available somewhere?
Nothing wrong with used parts but the plan for this bronco is to make it pretty and fun to drive. It will be lucky to see 4wd as long as I own it.
I'm not particular to any setup just trying to find something that will leave enough room for AC, PS, Hydroboost and C4 with adequate cooling capacity. I think but am not 100% yet that I'm going with the blueprint "bronco" motor which is why I started looking at their accessory drive setup. Right now the frame is being sandblasted and I have a bunch of parts on order so I have some time to figure it out.
 

74 Bronco Billy

Contributor
Sr. Member
Joined
Jul 4, 2016
Messages
798
The explorer front dress can be made to look nice. Powder coat the pulleys, new bearings, and have someone tumble your aluminum brackets, they come out real nice.
40f19e0d46a0a58ea763fd3a5cc2397f.jpg
39dcfbbd68b49963933da4e9f5d80669.jpg
a78bf7cbf3f7470f227127ec9270056d.jpg


Sent from my SAMSUNG-SM-G930A using Tapatalk
 

JSBX

Contributor
Sr. Member
Joined
Mar 10, 2010
Messages
652
Check out BC Broncos. They have an Explorer type front dress kit with everything you need.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Also Sanndmann3 here is a very popular provider of junkyard sourced units. Has all hardware and necessary parts at a very reasonable price and well shipped.
No complaints that I've ever heard.

Of course, being used it's up to you to gussy them up and make them look cool, but that's the deal. Looks like BC's is already painted up and ready to go. Costs more up front, but not as much as some aftermarket stuff does.
Less bling for sure, but pure function has it's own bling sometimes.

Got a link to the particular system you're looking at JR?
(edit: nevermind, I see what they're offering)

Paul
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Just checked out their stuff. Very nice in a more subtle (as in, black) way.
Looks pretty straightforward, but I've always questioned the depth of dual belt systems. Some of which are not actually "serpentine" but that's just picking nits on my part.
The thing that actually worries me that it's hard enough to fit a couple of V-belt grooves in an EB, much less two WIDE belt pulleys.

I'd say get the specs from them and have some of us measure common points on our Explorer setups. Their alternator does not look too far forward, but the second belt for Power Steering and A/C are outboard of that.

I say have the Explorer brackets polished up, get a Tuff Stuff polished (or maybe even black! Ooohh, nice) 4G alternator and have a very good looking compact system.
Compact and very rigid mounting are it's claims to fame. Color or polish of your choice.

You automatically get the upgraded alternator too, at about 130-140 amps capability.

Paul
 

KBUCK1

Sr. Member
Joined
Feb 8, 2011
Messages
979
I had my explorer dress powder coated also. It's a metallic silver color. Looks like aluminum. But still a different look than the blueprint ones you posted.
 

Attachments

  • IMG_20170613_144437.jpg
    IMG_20170613_144437.jpg
    121.7 KB · Views: 253

DrLathrop

Full Member
Joined
Oct 11, 2009
Messages
297
Loc.
Fulshear, TX
Putting a blueprint 306 with explorer serp from sandmann in my 77. It already has vintage air system & running a stock Ford Explorer compressor on the serp setup. You will need a crank pulley from driven auto parts. Also will need a 50 oz flywheel if running a c4 as the blueprint engine is a 50 oz external balance engine.
 

redwards69

Sr. Member
Joined
Dec 8, 2014
Messages
367
Loc.
Double Oak, TX
Also Sanndmann3 here is a very popular provider of junkyard sourced units. Has all hardware and necessary parts at a very reasonable price and well shipped.
No complaints that I've ever heard.

Of course, being used it's up to you to gussy them up and make them look cool, but that's the deal. Looks like BC's is already painted up and ready to go. Costs more up front, but not as much as some aftermarket stuff does.
Less bling for sure, but pure function has it's own bling sometimes.

Got a link to the particular system you're looking at JR?
(edit: nevermind, I see what they're offering)

Paul

The setup I received from Sanndmann3 were in almost perfect condition. I did not have to paint or clean them.
 

tirewater

Bronco Guru
Joined
Jan 28, 2011
Messages
1,046
Loc.
San Francisco Bay Area
Hi all I've been lurking around here for the last few months getting answers to all my questions for a 73 we are doing frame off. Looking at running vintage air, has anyone looked into the accessory drives that Blueprint sells?
https://blueprintengines.com/produc...s-wp-ac-brackets-bolts?variant=13901075808322
I'm getting ready to call them and ask some questions but thought someone here might already know if these will fit?
Thanks for the answers to the 800 questions I have already found!

Does that accessory drive come with the engine? $1695 for brackets and pulleys seems a bit steep, but I heard chrome has gotten expensive.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
It's unfortunately not that far out of line for what things are going for these days. Billet machining, powder coat/anodizing/polishing just adds to it.
If you've priced an Explorer serpentine at the local CA Pick-n-Pulls lately, I bet if you take the alternator and pumps, the whole thing would cost north of $600-$700 used!
But yeah, those prices are why I never seriously considered the early offerings from March Performance and the other companies (few that there were) offering serp systems for our Fords. Just could not justify it for myself. I admit they do look very sexy though. And there will always be a market for sexy.

The first time I pulled an Exploder front off and took it to the counter, as he started ticking off every nut and bolt and idler and extra grease and dirt clump from the lot, and then got upwards of $500 I said hold on a minute, went back and tossed half the stuff into an empty wheel barrow and walked out with just the brackets, cover and bolts. Still spent too much!
I figured if I was going to pay that much, I'd get all new wear items.
Or buy from Sanndmann... Which I did on the next one.

The setups from March Performance and the others were never going to go into my Bronco even if I could have afforded them, because they were too large. I was only looking at them for my F350 which has a crapton more space.
Same thing I'd worry about with the BluePrint stuff. Especially with double belts.
For the Bronco, one of my main goals was always to get some extra space in front of the fan. And the ONLY setup that fit that characteristic (at least at the time, if not still) was factory stuff from the Explorer.

Paul
 

RG75Bronco

Jr. Member
Joined
May 23, 2010
Messages
141
Loc.
Jacksonville
I am still running the V belt with a Vintage Air compressor. I do not want to move the compressor from the passenger side. I have the Explorer brackets and bolts, but just don't want to go through the pain of moving the a/c. So what serpentine belt options are there out there?
 

RODRIG3911

Contributor
Bronco Guru
Joined
Jul 9, 2007
Messages
1,019
Loc.
Tucson
I love man Sandmann kit! I can't imagine a better after market kit then the explorer set up. Better 4G alternator with an awesome bracket, no slipping, better cooling and you can buy replacement bearings and belts over the counter

Also, I don't have a newer picture, but I've since went with the Saginaw pump using WH explorer bracket and explorer fan with clutch. Pushes a TON of air
 

Attachments

  • 20181120_100701.jpg
    20181120_100701.jpg
    152.1 KB · Views: 181

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,890
Same thing I'd worry about with the BluePrint stuff. Especially with double belts.
Paul

Hey Paul, the link he gave us shows a single belt setup.
 

Attachments

  • Blueprint.jpg
    Blueprint.jpg
    31.1 KB · Views: 177

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Hmm, I see. Not sure now what I was seeing that made me mention dual belts.
Thanks for pointing that out.

Still a nice looking setup, but does look fairly compact as well.
Anyone ever come up with a measurement for their kit? Does it list it in their info?

Paul
 
Top