• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

EFI Fuel Pump Wiring

LSUpete

Contributor
Bronco Guru
Joined
Jul 11, 2001
Messages
2,065
I have one of the Wild Horses Fuel tanks with the internal EFI pump and a Holley Sniper unit. Is there any reason why I cannot install a switch in the fuel pump power wire? I'm thinking of adding a switch as a theft deterrent.

:cool:
 

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
You can put a switch on that. The factory inertia switch is doing the same thing, so adding a theft switch isn’t a problem.

Mark
 
OP
OP
LSUpete

LSUpete

Contributor
Bronco Guru
Joined
Jul 11, 2001
Messages
2,065
You could put a switch in the new Red 14-18ga wire to the new relay; or you could just trip the inertia switch:

(phone app link)

The Sniper wiring harness has a blue 14 gauge (blue) wire that serves the fuel pump. THAT is the wire I'm thinking of using because it runs from the engine harness to the tank, and I can run that through my center (lockable) console.
 
OP
OP
LSUpete

LSUpete

Contributor
Bronco Guru
Joined
Jul 11, 2001
Messages
2,065
Top