• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Turn Signal Turn-Off Cam

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,890
I have a Lecarra steering wheel and hub adapter that I bought from WH a long time ago. It uses roll pins to turn off the turn signal. One day one of the
roll pins broke my turn signal. Strangely enough, it broke the small lower inner "ear", not the long arm. So I pulled the roll pins and have been manually
turning off my turn signal for 10+ years.

Recently, a guy pulled out right in front of me, causing me to panic stop. After nearly t-boning the guy I look down, and sure enough my right turn signal was on.
Repairing my turn signal cancelling function moved to the top of my list.

So I install a new turn signal switch and roll pins and bingo! Turn signal cancelling! But I feared the inevitable (roll pin breaking turn signal again)
so I start reading old threads and found this link posted by thegreatjustino in a 7 year old thread. It describes a way to modify the arms so that
the small diameter roll pins don't "snag" the arms, which is what causes them to break, especially for you guys in freezing temperatures. I was
about to do mod then thought, I'll try the "real" turn off cam first. So I got one from Tom's and although it shows the one with 1 turn-off nub,
I received one with 2 turn-off nubs, and from what I read is the preferred one. Woohoo!

I obviously had to modify it, so after measuring roll pin height I ended up cutting over half the bottom off. I then wrapped the new bottom with
electrical tape to isolate it from the horn contact ring, pulled the roll pins and got it on my adapter. That's when I noticed the 2 nubs lined up
perfectly with the roll pin holes, so I tapped in 2 new roll pins. I know spring pressure would have held it in place, but no way in hell is it ever
gonna move now. Sorry for the long rant, and no post is complete without pictures.

Cheers,
Scott
 

Attachments

  • turn-signal-cancelling-cam.jpg
    turn-signal-cancelling-cam.jpg
    82.4 KB · Views: 146
  • turn-signal-cancelling-cam2.jpg
    turn-signal-cancelling-cam2.jpg
    124.8 KB · Views: 198

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
Thanks for that.... Been dealing with the same issue. The roll pins should have been drilled closer to the center of the steering hub. you can only bend then in so far for better clearance
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
I had the role pins and holes on a Grant adapter with the same results. The OE cancelling cam was the 1 hump type but I lost it. The 2 hump type was easier to find so I used it. Them I found it canceled the signal on lane changes and made the extra effort to find a one hump.
 
OP
OP
gr8scott

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,890
So I thought adding the roll pins was a good idea, turns out it was not. They pushed the turn-off cam a little outward, causing it to make
slight contact with tower that the holds brass turn signal button, randomly sounding my horn. So out came the pins, added a o-ring and all is well.
For anyone interested in how it works I shot a video in which I'm activating and returning the right turn signal.

https://www.youtube.com/watch?v=lodR01Gy6js

I had the role pins and holes on a Grant adapter with the same results. The OE cancelling cam was the 1 hump type but I lost it. The 2 hump type was easier to find so I used it. Them I found it canceled the signal on lane changes and made the extra effort to find a one hump.

Do you remember where you got it from? It's what I ordered from Tom's, but not what I received.
 

Attachments

  • 20200322_072753.jpg
    20200322_072753.jpg
    79.4 KB · Views: 107
  • 20200322_072827.jpg
    20200322_072827.jpg
    65.9 KB · Views: 96
  • 20200322_072911.jpg
    20200322_072911.jpg
    72.2 KB · Views: 90

jwats73bronco

New Member
Joined
Nov 1, 2018
Messages
26
So rough estimate? How much clearance do roll pins need.
I put in a new turn signal switch and now auto return sticks and sometimes horn blows.
I hate to take it apart again. Whole thing upgrading to LED signals was a pain!
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
I got my one lump cancelling cams from my original Broncos. One was lost before I knew it's advantages. Now I use a '78 Bronco column. On these the role pin locates a nylon ring that has the cancelling cams integrally molded into it. The whole '78 system fixes all the '77 problems, IE the horn switch, turn signal switch, steering wheel diameter, and the lack of a lane change function. It looks and works identically in front of the fire wall. It's not original to EBs, but it's pure Ford Bronco. Just one year newer. Many long time Ford truck owners that drove them through the '60s-'80s don't see anything out of place.
 
Top