- Joined
- Oct 8, 2019
- Messages
- 587
Hey folks,
I’ve installed a complete new braking system on my 74, front and rear disc, master cylinder, proportioning valve, new lines, and Hydratech unit. All parts from JD.
I originally bled the brakes by myself with an air hose vacuum unit and couldn’t get the pedal tight. Today I got my wife to help and did it old school method, pedal still goes to floor.
Did some reading here and decided I better check the gap between the hydroboost rod and the MC piston, and bingo found my problem.
Excuse my rudimentary measuring technique but couldn’t fit my calipers in there. In the pic with the screwdriver, it bottomed out in the MC and wasn’t hitting the piston, yet still longer that the rod in the hydroboost. I have approximately 1.5” gap, the rod is depressing the piston but it must be close to the floor before it reaches.
I’ll call JD tomorrow and I’m sure they’ll resolve this, but I thought I’d post in case anyone else runs into this problem, and maybe save them some time.
Sent from my iPhone using Tapatalk
I’ve installed a complete new braking system on my 74, front and rear disc, master cylinder, proportioning valve, new lines, and Hydratech unit. All parts from JD.
I originally bled the brakes by myself with an air hose vacuum unit and couldn’t get the pedal tight. Today I got my wife to help and did it old school method, pedal still goes to floor.
Did some reading here and decided I better check the gap between the hydroboost rod and the MC piston, and bingo found my problem.
Excuse my rudimentary measuring technique but couldn’t fit my calipers in there. In the pic with the screwdriver, it bottomed out in the MC and wasn’t hitting the piston, yet still longer that the rod in the hydroboost. I have approximately 1.5” gap, the rod is depressing the piston but it must be close to the floor before it reaches.
I’ll call JD tomorrow and I’m sure they’ll resolve this, but I thought I’d post in case anyone else runs into this problem, and maybe save them some time.
Sent from my iPhone using Tapatalk












