• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

tow bar

johnbeck

Sr. Member
Joined
Aug 11, 2015
Messages
534
Any thoughts on a tow bar attachment? My neighbor has a Blue Ox that looks good. Are the only options for towing with a C4 automatic is to remove the driveshaft or install a disconnect mechanism ? Anyone using a dolly? Anyone tire of their method and try something else? Thanks
 

Wrightracing

Jr. Member
Joined
Apr 3, 2020
Messages
117
For flat towing, I am running an np205 transfer case in neutral, front hubs unlocked never had an issue. The Dana 20 may be different
I have a 10,000 lbs Falcon 2 Tow bar Great bar.

Sent from my SM-N960U using Tapatalk
 
Last edited:

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Transmission in park (no output shaft spinning without lube, no damage)
Transfer case in neutral
Lock the front hubs (this will spin the front output gear set submerged in oil and that will keep the oil flowing through the transfer case to keep it lubed)
Another option is to overfill the transfer case so the rear output bearings stay wet and you don't need to lock the hubs.

The dana 20 is generally lubed from the transmission input shaft always spinning the countershaft gears and that throws oil everywhere to keep everything lubed. The issue is the rear output bearings don't get lubed without that splash. Very often they will be just fine on the residue oils, there really isn't a load on them, they just spin. But some have smoked those bearings flat towing. roll of the dice. Get them lubed, they will be fine.
 
OP
OP
J

johnbeck

Sr. Member
Joined
Aug 11, 2015
Messages
534
Thanks for the help - great explanation. I have 235/75R15 BFG's. How fast can I tow C4 in park, Dana 20 in neutral, hubs locked? How much do I overfill the D20 if I elect to go that route instead?
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
Any thoughts on a tow bar attachment? My neighbor has a Blue Ox that looks good. Are the only options for towing with a C4 automatic is to remove the driveshaft or install a disconnect mechanism ? Anyone using a dolly? Anyone tire of their method and try something else? Thanks

The tow bar needs to be mounted onto the Bronco low enough that the tow bar will be angled up slightly to the towing vehicle. That way, when the towing vehicle brakes hard, the Bronco won't try to climb off the hitch ball.

The owners manual recommends that you disconnect the driveline regardless which tranny you have. I like to remove it altogether. That way I can still use the Bronco in front drive for short errands.
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
I don't flat tow my Bronco but do my Samurai. I drop the rear drive shaft. No worries....

Tim
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
How fast can I tow C4 in park, Dana 20 in neutral, hubs locked? How much do I overfill the D20 if I elect to go that route instead?

There is nothing written in stone about this. You have to use your best judgment.
 

Nothing Special

Sr. Member
Joined
Nov 25, 2016
Messages
848
Back when early Broncos were just Broncos, the Big Three (plus Jeep) had varying instructions / limitations for flat towing. Some said none without unlocking the front hubs and dropping the rear driveshaft. Some said up to 50 miles. Some said up to 200 miles with the front hubs locked. Some said don't exceed 50 mph. Bottom line is that there isn't any hard and fast limit for how far or how fast you can flat tow.

Like Broncobowsher said, just the rear output shaft spinning (t.case in neutral, front hubs unlocked) does a poor (at best) job of getting lube moving to the rear output bearings, so that's the main issue to deal with.

Just betting that enough lube will get there works for a lot of people. And it doesn't work for some people. I'm not saying you can't go that route, but I'd never recommend it.

Overfilling the case to make it more likely that lube will get there ups your odds. You'd want to get the lube level up to roughly the bottom of the output shaft bearing (even a little lower would help as long as the mainshaft gears are in the soup keeping things stirred up). But again, I wouldn't go that route personally.

Locking the front hubs spins the front output shaft which is WAY down in the soup. This throws lube around really well. I don't see how this could be any worse for the rear output bearing than normal driving. Still, I get a little vibration from my front driveline at higher speeds, so I prefer not to do this for long tows, and I drop the rear driveshaft out.


As to where to mount a towbar, as directly to the frame as possible is my answer. In my case I built a bumper that's welded to tow points that are bolted into the front frame horns. I mount the (homemade) towbar to the tow points.


Like blubuckaroo said, having the towbar angled down from the Bronco to the hitch can make the Bronco try to pole-vault over the truck in a hard stop. But that's not all bad. It puts more weight on the truck's back tires so you're less likely to jackknife. I really don't want it angled up and taking weight off the trucks rear tires.

The bigger issue for me on towbar angle is that if it's angled up or down it will try to change the distance between the truck and bronco as either vehicle moves up or down (suspension cycling). This can really get annoying on less than smooth roads as the Bronco keeps hammering you back and forth (it was even noticeable in my class C motorhome). Having the towbar level minimizes this.

But rather than change the height of the towbar attachment point I find it better to change the height of the hitch ball. As I said, my towbar is attached directly at my frame, so it's pretty high. I have a drawbar with about a 6" (8"?) rise to keep it pretty flat.


Keep in mind that legally towing a trailer as heavy as a Bronco (and when you're flat towing the Bronco is a trailer) in most (all?) states the trailer needs brakes. You can add "toad" brakes to the Bronco (I have), but this does complicate the whole thing, and makes a trailer or tow dolly more attractive.

A tow dolly addresses the tow bar attachment and brake issues, but you still need to deal with the transfer case. Yes you can back the Bronco on the dolly and tie the steering wheel off. Usually that works, but I've heard of enough problems that I won't do it. Since I already have the attachment and brakes dealt with I don't see any advantage for me to go to a dolly.

A trailer is ideal, except for buying and storing the trailer (storage being the reason I don't have one yet). Along with addressing the issues already raised, it's also a lot easier to back up (difficult with a tow bar, almost impossible with a dolly) and it doesn't wear out your Bronco's tires.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
If you wonder how much oil gets slung around by spinning gears, another forum posted a video from Gale Banks with a clear diff cover showing the oil flow at pretty low speeds. His argument was against the large capacity diff covers with square profiles that won't flow oil like a factory rounded diff cover will. But is still shows how oil bath gear boxes get a lot of circulation when the gears are spinning in oil.
 

SHX669

Bronco Guru
Joined
Jan 9, 2009
Messages
1,997
When flat towing more than a short distance I disconnect or remove the rear driveline -just in case ----.
Ditto on the tow bar mounting points AND their secure mounting to the frame. I used heavy duty 2 1/2" angle iron as a backing for the stock front bumper then welded 2" HD angle iron to that at a 90* . Those bolt up on each side of the frame horns about 8" or so past the factory bumper mounting holes. The Bumper , the HD angle iron and the tow bar mounting "tabs " are all bolted to each other and also to the frame horns - and yes I made a few spot welds where the 2" angle iron mounts to the frame.
 

72Sport

Bronco Guru
Joined
Jul 8, 2002
Messages
2,954
There were a few posts on here about transfer cases getting hot enough to smoke when the Broncos were towed. Some said they had just worked on the transfer case. I think the problem was caused by using a high temperature grease to hold the 13 needle bearings in place during assembly. There are three oil passages in the cavity that the bearings are located. You plug up those 3 holes with a high temperature grease and you shut off the oil supply the the two bearings in the rear housing until the high temperature grease melts. "High temperature grease holds the 13 needle bearings in place much better than anything else". I have found that petroleum jelly will hold the bearings just fine and will dissolve in the case oil and not interfere with the oiling on the rear output bearings. If you look at the face of the rear transfer case housing you will see a triangular hole on one side and a round hole on the other. The triangular hole is the collector for the oil. The round hole is the overflow to maintain the oil level for the rear output bearings. Again, oil is supplied to the output bearings through the holes in the rear of the cavity for the 13 needle bearings. The three holes are the path for the oil to lube the rear output bearings. Don't use high temp grease to hold the needle bearings in place.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
They do make special transmission assembly lube just for that purpose. By itself it holds stuff in places but is designed to dissolve when splashed with lube. Trans goo?
 
OP
OP
J

johnbeck

Sr. Member
Joined
Aug 11, 2015
Messages
534
You guys are incredible. Thank you all for taking the time to respond. After having my Bronco apart for over two years It's close to running. I'd love to tow it behind my truck ten hours to Tucson Az. Your input has given me a number of approaches to consider for that tow. Thanks so much! John B.
 

McChargue

New Member
Joined
Oct 5, 2018
Messages
20
I have some experience with a tow bar and not all of it good.We towed a 68 back to Alaska behind our motorhome a couple years ago. I fabricated the tow bar mounts on the aftermarket/homebuilt winch bumper and they held up great. The problem arose when the bumper to frame interface failed. The bolts ripped out of the factory holes in the frame horns where the bumper was mounted. This resulted in a less than desirable outcome to say the least. So my advice is that you need to ensure the bumper is tied into the frame with more than just the bolts into the frame horns.
 
Top