• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Flasher issue

walls

Full Member
Joined
Oct 4, 2010
Messages
222
I cant remember, Is there a flasher for the hazards and a flasher for the turn signals or they both work off 1 flasher?
 
OP
OP
W

walls

Full Member
Joined
Oct 4, 2010
Messages
222
From the reading I have done it sounds like there is 2 but dont remember ever seeing 2.
 

67sport

Sr. Member
Joined
Nov 27, 2010
Messages
362
Loc.
Vancouver Island, Canada
Yes there is 2 in 73. Do a Google search for seabiscuit bronco wiring, it'll take you to a page with 73 wiring diagrams. Where it's physically located in the truck, I don't know,
I have a 74 I'm not that intimate with, and a 67 I wired myself many years ago, so no help there.
I bet dirtdonk can tell you where it is, and probably how you need to lay upside down to get to the dang thing. 😁
 

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
The flasher units are usually flopping around loose but the originals snapped into holes in the lip behind the dash. Mine is just to the right of the steering column. The flasher has a tab on the end that twists into a hole in the dash lip. Stick your hand up there and feel for it. You can also see the tip protruding thru the hole under the dash. Should be blue….twist it 90 degrees and it will pull out.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
They clipped into their own little holders, and were usually attached to the steering column support flange. Some years at least had one on each side of the column.
But like was said, they're often just found hanging around. If you only have one, you'll still need to look for the second connector. They are the same shape, but have different colored wires. If not obviously visible, look up over the top of the column where someone may have laid it instead of re-attaching to it's original location.
Many of them I've seen had one at least that was blue plastic. Most of them had a little "tang" on the top that could be used to snap into a hole without using a clip/holder/thingy. But pretty sure all Broncos got the clips holders.
Since '73 was a fairly transitional year for electric stuff, you're a prime candidate to find all of that previous information is incorrect!:rolleyes:

And yes, you fold up an old-school moving blanket (the thick padded type), lay it in the driver's side foot well, place a small tool box below the pedals to lay your head on, twist around so that your head is lying on the tool box just pushing on the brake pedal, one leg is up on the seat and the other is hanging out the door and turn your head 10.5° to the passenger side, open your eyes again (after you had to close them to keep the debris falling out from under the dash from getting in them) and look up. Usually helps to close one, cross the other, and stick your tongue out to one side (does not matter which side) while holding the flashlight steady. A helper really comes in handy for the light, because you can only use one arm as the other is stuck in the door jam with your shoulder.:mad:
The chiropractor comes in handy later...;)

The old-guy way of doing this more comfortably is to take the ten extra minutes to remove the driver's seat altogether. This plus the moving pad and tool box and your only danger (other than the aforementioned falling debris) is falling asleep with your head on the brake pedal and draining the battery!:sleep:
Or suffering the humiliating frustration of finding out they were both hanging right there and all you had to do was reach under and feel.

But most of all, have fun!

paul
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
By now someone should have pictures of where there particular Bronco had them clipped originally. I can't now because one has been moved around and the other completely re-wired.
Oddly, on the re-wired one it's even harder to find the flashers!

paul
 
OP
OP
W

walls

Full Member
Joined
Oct 4, 2010
Messages
222
Thanks fellas, I'll jam myself up under the dash again today and take a closer look for flasher#2
 

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
Thanks fellas, I'll jam myself up under the dash again today and take a closer look for flasher#2

Here’s a picture of my ‘77. The flasher twist locks into the hole just to the right of the column. That’s my a/c duct beneath it.
600b96d1ed8b741bb822bbc9c1d3ca36.jpg
 

gnpenning

Contributor
Bronco Slave
Joined
Dec 26, 2011
Messages
2,601
Loc.
I have more questions than answers.
Since I didn't see it mentioned, the flashers use a heavy duty flasher that handles 4 light bulbs and flashes at normal speed. Turn signals only have 2 bulbs unless you have a trailer.

Flashers have a bimetal spring in them that heats up and cuts power flowing through, they cool down and make contact again allowing current to flow to lights until they heat up again, rinse and repeat. The more bulbs in the circuit the quicker it will heat up and cut power. This is why you see blinkers cycling faster on vehicles with trailers, they didn't upgrade to a heavy duty flasher.


I have to admit it has been awhile since I have bought one and don't know if they are all now heavy duty ones ??
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Here’s a picture of my ‘77. The flasher twist locks into the hole just to the right of the column.
Perfect! Thanks for that.
That’s what I was trying to describe above, but I guess some Broncos did use it instead of the clip. So I was wrong about that.
Just the kind of stuff we need to see still.
 
Last edited:

Comemonday71

Jr. Member
Joined
Jun 19, 2019
Messages
138
Hi Gang!
I installed LED turn signals front and rear. For them to work properly I used a United Pacific flasher (part #90650) but.......No dice. Turn signals did not flash and stayed solid. I then installed a United Pacific flasher with the reverse polarity base (part #90652) and whala.....all is good and flashers work great and turn off and on with no issues! What the heck is "reverse polarity" and why did the reverse polarity make things work?? Thanks!
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Because LED lamps are polarity sensitive.
The alternative is to simply turn the bulbs around in the socket when that works. But when that’s not possible, or is just too much work, then a reverse polarity flasher is the answer.
Apparently anyway, since I didn’t even know they existed until just this moment.
 

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
You can also buy adapters to switch the polarity of the flasher. It simply plugs onto the flasher.
 
Top