Quite a list of done's and still-to-do's it looks like!
A great head start.
Just to make certain we're all on the same page again though, when you say "slow" when cold, you mean the engine turns over very slowly such as with a weak battery? Or slow, as in it takes longer for the engine to fire?
Just making sure.
Don't scrimp on the battery cables. Use at least 4ga, but 2ga is better. Many of us use custom cables made up of anything from 1ga or 0ga standard cable, to 1/0 welding cable.
No trouble with size in those cases!
But I believe the originals were 6ga which is perfectly fine when new and with a stock engine. But for more overhead capacity with higher compression, older starters, more ignition timing, deteriorating cables over time, and anything else you can think of, bigger is naturally better when it comes to battery and starter cables.
Even the short one can benefit, but it's all about the length. And anymore, 2ga copper is standard offerings in most auto parts stores.
Easy and inexpensive.
Not saying that's your only issue with the slow cranking, and the slow when cold thing is odd. More often than not if it's ignition timing too far advanced, it gets worse when hot.
So perhaps there is something else afoot here.
Still, doesn't hurt to verify.
Good luck.
Paul