J-man
Sr. Member
Last year before Bronco Safari I installed the Holley EFI Kit I purchased from Wildhorses. The kit was a simple install, I mounted the high pressure fuel pump on the frame and converted my 23 gallon fuel tank for this application. This particular kit did come with the digital control panel which I mounted in the Bronco. While at Bronco safari the everything ran well, the only problem I encountered was the digital screen was not responsive at times and would on ocassion lose the ability to change settings etc. This didn't seem to harm the performance of the vehicle. After bronco safari last summer I took the bronco for a drive on a pretty warm day and the bronco was running hot, I pulled into a gas station for a drink and the bronco wouldn't start. I had to wait 30-45 minutes before it would start. I'm suspecting that the fuel pump and fuel got to hot and vaporized, with the exhaust next to the pump. On cooler days the bronco would run ok and never stall out like this.
Forward to about a month ago I had to drive the bronco for about a week straight because my daily driver was in the auto body shop. Everyday I drove the bronco at least once usually multiple time the bronco seemed like it would go into limp mode with little power. It acted like one of the plug wires was pulled off and ran like crap. After a couple minutes the bronco would go back to full power and running normal. This happened at all stages in the drive sometimes first thing and sometimes when fully warmed up. Now keep in mind the digital controller has not been functional for me like it is froze up, cant change setting or navigate through the screen. I am baffled to why the bronco runs like this, does it have something to do with the EFI, o2 sensor, or fuel issue. I'm thinking its electrical but not sure. I called Wildhorses and they said Holly has been having issues with these screens and no longer offer them and all service would have to be handled from Holley directly.
I need to resolve this issue before taking the bronco back to Bronco Safari this year.
I am planning on putting an in-tank fuel pump in to help resolve this fuel heating issue.
Any advise will be amazing.
Thanks Rick
Forward to about a month ago I had to drive the bronco for about a week straight because my daily driver was in the auto body shop. Everyday I drove the bronco at least once usually multiple time the bronco seemed like it would go into limp mode with little power. It acted like one of the plug wires was pulled off and ran like crap. After a couple minutes the bronco would go back to full power and running normal. This happened at all stages in the drive sometimes first thing and sometimes when fully warmed up. Now keep in mind the digital controller has not been functional for me like it is froze up, cant change setting or navigate through the screen. I am baffled to why the bronco runs like this, does it have something to do with the EFI, o2 sensor, or fuel issue. I'm thinking its electrical but not sure. I called Wildhorses and they said Holly has been having issues with these screens and no longer offer them and all service would have to be handled from Holley directly.
I need to resolve this issue before taking the bronco back to Bronco Safari this year.
I am planning on putting an in-tank fuel pump in to help resolve this fuel heating issue.
Any advise will be amazing.
Thanks Rick











