MerganserMaster
Jr. Member
- Joined
- Jun 9, 2023
- Messages
- 115
I have now removed both heads from my 1975 Bronco 302 V8 and want to start on the surface preparation while I wait for my gaskets to come in the mail. How do I go about removing all of the "gunk" without it all falling into the cylinders? I have thought about stuffing them with shop towels, would that work? Also should I clean the top of the pistons themselves as it appears there is some carbon buildup, and if so what should I use to clean it? I do plan on honing the cylinders as there is a fine ring of "gunk" towards the top of them. Below is a photo of the block in question.
https://flic.kr/p/2pnHfBP
https://flic.kr/p/2pnHfBP











