• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What have you done to your Bronco today?

Oldtimer

Contributor
Jr. Member with Sr. moments
Joined
Feb 4, 2005
Messages
1,801
Loc.
Sunnyvale, CA
Trimmed my BCB headers to clear AFR heads, thanks to a comment by Viperwolf1.
A lot easier to do when all parts are on workbench and not in Bronco.
1746335135633.png

1746335160435.png

1746335186614.png


 

NJBronk

Contributor
Sr. Member
Joined
Oct 11, 2022
Messages
369
Installed the rear of the WH stock height suspension. First time doing any sort of suspension work. It’s been sitting in boxes in my garage for over a year, so it was time.

Took me around 4 hours by myself and with some “help” from my 9-year-old for about 30 mins. Old bushings were toast and the one bolt on the shackle gave me hell on both sides. Had to undo and re-do a couple things after rookie mistakes, including flipping the bilsteins the “right” way, but I’m glad to get to know the truck even better with every project.

Tomorrow is the front!

IMG_3710.jpeg


IMG_3715.jpeg


IMG_3722.jpeg


IMG_3724.jpeg


IMG_3720.jpeg
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
I removed the factory hubs from the D30 and went through them, removing dirt, rust, etc. Cleaned up everything then and installed them on the D44.

I had new O-rings, but the center red knobs are out of stock everywhere and no timeline from the supplier is available.
 

Attachments

  • IMG_20250503_184940546.jpg
    IMG_20250503_184940546.jpg
    304.1 KB · Views: 72
Last edited:

BronCowie

Contributor
Old Timer
Joined
Apr 24, 2007
Messages
8,290
Loc.
Vancouver, WA
Well it is a 6G, but I'll post it here anyway. Installed hood struts which makes it much easier to pop the hood. I did this on my '69 which made a huge difference because those hoods are so much heavier, but still a nice upgrade.

Hood Struts4.jpeg
 

abrogate932

Jr. Member
Joined
Jun 5, 2018
Messages
68
Loc.
St Louis MO metro
full



After filling up, the 302 wouldn't run well enough to pull away from the pump. Felt like I was starving for fuel as it ran and then gradually cut out. After a few times firing up, it would just die out quickly. Over the next hour, I tried a few times every 20 minutes and no go. I called for a Friday night after hours tow $$$ back to my shop and it fired right up and drove around fine.
 

hsach

Contributor
Members Only
Joined
Apr 19, 2013
Messages
435
I am getting the bronco painted in June, so I need to fix a few metal issues that have been bothering me. The new replacement cowl was almost 1/2" short on the driver side making the top fender hole too close to the edge. I extended it out to fit the bolt clip properly. After fixing the inner fender, the outside top lip area near the second bolt hole was fairly mangled and just looked bad. I tried to straighten it, but it needed to be cut out. I also stripped everything out of the doors to have the insides sand blasted. There is surface rust inside on the ends, and I don't want that painted over. Both window frames have cracks that I will weld up when they get back, I would have missed them if it wasn't for this forum. I could barely see them, but have seen a lot of threads that mention this area, so thanks!

20250412_132201.jpg

20250416_180323.jpg
 

Soylent

Contributor
Sr. Member
Joined
May 4, 2016
Messages
690
Loc.
California
full



After filling up, the 302 wouldn't run well enough to pull away from the pump. Felt like I was starving for fuel as it ran and then gradually cut out. After a few times firing up, it would just die out quickly. Over the next hour, I tried a few times every 20 minutes and no go. I called for a Friday night after hours tow $$$ back to my shop and it fired right up and drove around fine.
Fuel filter clogged?
 
Top