• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

migs Bronco Barn - a chronicle of what's happening at the new place

SLOWnEASY

Contributor
Sr. Member
Joined
Sep 26, 2022
Messages
517
Loc.
San Diego, Ca.
Next up was this quickie fix of this evil looking crack/hole on the edge of the hood on the driver's side, pretty brutal and poorly repaired in the past. The hood isn't in the best of conditions to begin with and again, not wanting to create a big project and potentially open up another big can of worms by attempting to cut out a section and weld in a new piece and have to deal with a much larger area of body work and paint, I opted for a smaller touch up approach.
I formed a heavier piece of steel to fit in there on the underside for reinforcement, and glued it in with panel adhesive and a few strategic tack welds. A little filler and primer, then blend in the base coat and clear.

View attachment 953379 View attachment 953380 View attachment 953381 View attachment 953382 View attachment 953383 View attachment 953384 View attachment 953385 View attachment 953386 View attachment 953387 View attachment 953388 View attachment 953389 View attachment 953390
I just found this thread and I am amazed at the work you do. I almost wish I lived closer.
I'm curious if that crack is common on these Broncos as mine has a similar although smaller crack in the same basic location.
 

bronco1017

Sr. Member
Joined
Mar 22, 2010
Messages
564
I just found this thread and I am amazed at the work you do. I almost wish I lived closer.
I'm curious if that crack is common on these Broncos as mine has a similar although smaller crack in the same basic location.
Do you have hydraulic hood shocks?
 

SLOWnEASY

Contributor
Sr. Member
Joined
Sep 26, 2022
Messages
517
Loc.
San Diego, Ca.

Attachments

  • Hood crack.JPG
    Hood crack.JPG
    174.1 KB · Views: 76
OP
OP
migs

migs

Sponsor/Vendor
Bronco Guru
Joined
Nov 12, 2011
Messages
1,451
Thanks all, appreciate the compliments. I just try to improve or make things a little better than they were.
Pulled it out to check it in the sunlight and to wash all the dust off before buffing.

IMG_0742.jpg IMG_0743.jpg IMG_0745.jpg IMG_0747.jpg IMG_0748.jpg
 

bronco1017

Sr. Member
Joined
Mar 22, 2010
Messages
564

fordfan

Bronco Guru
Joined
Sep 13, 2009
Messages
3,592
Thanks for the pictures of your accomplishments on the latest Bronco project, Migs! I enjoy seeing progress like that!!! ...and it makes me want to get to work!!
 
OP
OP
migs

migs

Sponsor/Vendor
Bronco Guru
Joined
Nov 12, 2011
Messages
1,451
Maybe I'm having half cab withdrawals now that it's gone.... I pulled one of my own projects out of storage the other day.... the 67 half cab.
Not planning on a major restoration just yet, was thinking about maybe putting the snow plow back on. It used to run, so will focus on seeing about getting it running and stopping first before doing any other patches or "upgrades".


IMG_0800.jpg IMG_0801.jpg IMG_0802.jpg IMG_0803.jpg IMG_0804.jpg IMG_0806.jpg
 
Top