bronco1017
Sr. Member
- Joined
- Mar 22, 2010
- Messages
- 564
That Bronco owner is one lucky SOB. I bet he almost had tears in his eyes reading these. Fantastic work Mig’s.
I just found this thread and I am amazed at the work you do. I almost wish I lived closer.Next up was this quickie fix of this evil looking crack/hole on the edge of the hood on the driver's side, pretty brutal and poorly repaired in the past. The hood isn't in the best of conditions to begin with and again, not wanting to create a big project and potentially open up another big can of worms by attempting to cut out a section and weld in a new piece and have to deal with a much larger area of body work and paint, I opted for a smaller touch up approach.
I formed a heavier piece of steel to fit in there on the underside for reinforcement, and glued it in with panel adhesive and a few strategic tack welds. A little filler and primer, then blend in the base coat and clear.
View attachment 953379 View attachment 953380 View attachment 953381 View attachment 953382 View attachment 953383 View attachment 953384 View attachment 953385 View attachment 953386 View attachment 953387 View attachment 953388 View attachment 953389 View attachment 953390
Do you have hydraulic hood shocks?I just found this thread and I am amazed at the work you do. I almost wish I lived closer.
I'm curious if that crack is common on these Broncos as mine has a similar although smaller crack in the same basic location.
I do not, only the standard heavy hood to lift and support with the prop rod.Do you have hydraulic hood shocks?
The hydrolic rods caused the crack in my hood.I do not, only the standard heavy hood to lift and support with the prop rod.
Mignificent!Well, this one's about ready to go. All cleaned up and to finish it off added a couple of custom aluminum pieces to cover the unused holes on top of the bed rails.
View attachment 953493 View attachment 953494 View attachment 953495 View attachment 953496 View attachment 953497 View attachment 953498 View attachment 953499 View attachment 953500 View attachment 953501 View attachment 953502
Its very common.I just found this thread and I am amazed at the work you do. I almost wish I lived closer.
I'm curious if that crack is common on these Broncos as mine has a similar although smaller crack in the same basic location.







