I made the initial mistake of using the ignition stud for the trigger on my fuel pump relay but quickly realized the circuit is cold when cranking - which means the fuel pump is also cutting off.
Centech harness. Any suggestions for a circuit that’s hot when cranking and in “run” but goes cold when “off”
I know I can figure it out…, someone may save me from laying under my dash longer than needed….
Thanks!
Centech harness. Any suggestions for a circuit that’s hot when cranking and in “run” but goes cold when “off”
I know I can figure it out…, someone may save me from laying under my dash longer than needed….
Thanks!











