What have you done to your Bronco today?

[My 72 Bronco]

In the process of building a new motor! Standard main bearing gave me 0.001" clearance. Today replacing them with thin main bearing to give me an extra thousandth, then mock set up oil pump and windage tray for final lockdown!

 

[1969miller]

Not my bronco, however I mounted the solo motorsports arms tonight, these things look great! I used 4 degree c bushings and the customer will have plenty of caster. Going to bump it out tomorrow and start measuring for shocks and limit straps.

 

[1969]

Gathered the pieces from summit for the intake. Need to cut the tube down still and build a mounting bracket on the fender for it.

 

[nvrstuk]

Did I mention that I filled it up again for the 3rd time in 2 weeks? 6th time in a month... not cheap, but beats making interest payments on a new truck that isn't as much fun to drive! lol

Rodeo country here. Nat'l PRCA qualifiers nat our County Fair. This outfit is down this side of the Valley from us.

Lingering FF smoke hanging. Been clear for 6 wks!

 

[1969miller]

Actually worked on my own today. Reached my goal of pulling all the original wiring cleanly through the firewall and left everything attached to the dash. When I put the new tub on, it will be very easy to lay it all back out and plug things in. It all worked so why rewire it right now? Budget build.