Search results

I have stripped all the bedliner out of a bronco I am working on. In some of the bed seams I found active rust. The underside of the truck is all finished. So I dont want to soak it in ospho to kill the rust in fear of messing up the underside finish. So I chose to paint the rust areas with...

I just painted about a quart of POR 15 and did not get any on me. I am so proud.

I was reaming out a dana 30 knuckle for a steering upgrade today and went way too deep. Should I just find another knuckle or is there a good way to fix what I have done? can I drill it out to a thick wall tubing size and weld the tubing into place and then ream it over again to the correct...

I need 16 seat belt bungs for a cage that I am building. I did a search and found BTF and poison spider have them, also fount that Extreme custom fab has a different design. Looks like 10 bucks a piece for the fancy ones and 7.50 for non thru tube design. Anyone got a better price out there...

Yep I am looking for an aluminum 390 intake manifold. Anyone got one they want to sell.

I am currently working on a roll cage. I got the A pillar hoop in and am going to start on the c pillar next. I have a new best top for the build. It looks to me like I have to make room for the best-top hoops to clear the cage. It looks the tops rear hoops have a fixed position piviot...

Yes I am, Over the next couple weeks I am going to build a roll cage. I am going to try my hand at one of the thru the dash roll bars. I know that idea is not new but I have a few ideas that might work out real nice. So off I go to bend some tubing and make some stuff.. Crossing fingers..

I need a good source for tabs and gussets and also rod ends and bushings and bungs oh my! I have used extreme custom fab but Mike does not have what I need. anyone got a good source? Thanks

Yep I am thinking about an overdrive for the bronco again. Some of you know I have killed a few AOD's and gave up on them. I am running a c6 now that works great But, The overdrive is missing. When I built the bronco I geared it for overdrive. So now it is a bit over geared. I talked to a...

I have seen a few build threads on building the roll bar into / behind the dash. I need some help finding these threads. yes I tried the search function but when you put Roll Bar / dash/ together you do come up with a bunch of options. Thanks

I have a set of 76 axles from a bronco. Disk brake 4.11 posi front and big bearing 4.11 posi rear. I have never been into them. the axles are all cleaned up and appear to be in good shape, Even all the disk brake stuff is good. the PO was going to use these in a mud truck. I have no idea...

I have a 5.0 with a 4 bolt balancer on it. I need a 2 grove / 4 bolt, v belt crank pulley that will line up with stock alt and PS. Did they make one?. Do I need to go to a 50 OZ. 3 bolt balancer to overcome this problem?

Ok I am going to put this offer out to save a brother some cash. I will be driving home from Denver CO on the 15th of this month. I am stopping at The bronco Hut to see Melissa and pick up a few parts for myself. I am driving home a half full 20' box truck so I will have room to bring some...

I need new front steering tie rod and drag link. Who is the guy that is making them on this site?

I am working on what appears to be a 10 year old ford crate motor, its a 5 liter roller motor with the one piece rear main seal. The camshaft was installed without the spider tray in the lifter valley. Well a few of the lifters had turned and ruined the cam, lifters, pushrods. Well I am...

OK guys. I need some input on best headers to get for a bronco. I was looking at some hooker headers but figured I should ask you guys for your experienced answers. Thanks

There not good pictures but the set up works good and its easy. ( because I had all the stuff.) if you have 2 decent saw horses and 2 pipe clamps than you can do this and it works really good for painting a frame. I put the clamps on the horses longways and tightened them up. I got 2 pieces...

Now thats what I call a parts shipment! The guys at Tom's are on the ball. I ordered this last week on the 29th. Oregon to fla in no time. Anyone want to guess what's in the box?

Add this to the list of crap you find when taking apart someone's bronco. The guy cut into the frame to add a bigger radiator. Transmission lines run under and over the headers.

I need a little help with the ID of this caliper. It looks like some junk yard piece together crap. It's some stupid crap, look at the rotor it's pressed on the inside face of the axle. So I guess to service the rotor I need to pull the axle and press out the studs to get it loose. Who...