Search results

For those that has done this, where and how did you make your cable connection on the carb? Pics will help.. I've done the stock type to the pedal but I want a solid type that doesn't change rpm at every stop.

30amp fuse keeps on blowing out. Where do I start to troubleshoot this gremlin? I have relays for front headlights and those along with its fuse are good. it happened while driving early in the morning. It just went dark. Hazzards work so I drove with those on til sun came up. Also turn...

What directions should I go with this?

What are you using to bump your idle rpm up for your AC? Solenoid? Aftermarket or stock? List Part number and or application please. I've been manually bumping it through the throttle cable on my dash.

Looking for modern radio am/fm, Bluetooth, with plug in connections for iPod or smartphones. What options is out there?

What's your idle RPM? Motor size and trans. Cam EFI or carb'd

Anyone got picks to post? Post them in this tread please. Looking for options on placement. Side by side on passenger front corner. One on each corner. Post what you got. Describe wiring.

Are these 2 identical? Can I use a C4 motor plate in front of the AOD trans?

What is your cruise RPM? Where your motor is happy at. List motor size, gear ratio and tire size.

I know I did it before. I need to refresh my memory, not sure if I cut out the retainer or I just pressed it off. I just redid my 9" d-locker and new gear install and then I find passenger end of housing leaking. What's the easy way?

I have 2 sizes, 1 much larger than the other. Is this normal with the Nodular case pinion support ?

What is the stall rated at?

I having a problem with V belt squeal. Can't find the happy tension. When I think I got it good and I turn on the AC, burp the throttle, the squeal comes and goes. Can it be driven by the alt pulley alone or does it need the belt to also go around the crank pulley? Crank pulley will drive the...

Anyone know where I could get the correct one? I have the double sump 351W oilpan with the thread in type port on the side of the pan for the dipstick. Moroso oil dipstick is 1/4" NPT but the pan is different thread. Help please.... Thanks madgyver

Is there a fiberglass hood available that accepts the factory OEM latch? Please post links....

Engine mounts checked. Bad trans bushings replaced. Driveshafts checked. U-joints all good. Converter bolts all tight. Oil level good. Still there's all low speed vibration while in gear. Up to speed it smooths out. Any ideas where to check next before I swap trans.

I'm building another 351W and this one is for the FireBronco. Looking for cam suggestions. What grind do you run in your 351W?

What are the differences? 302 heads has smaller chambers, both has same runners size and valve size. Question about head bolts. Do I need to bore out 302 bolt holes?

Are they still available? I thought I ordered a couple but apparently not so.

All the vendors had buzy phone lines and I couldn't get through. Any vendors extended their sale? I need stuff of one of my broncos...