• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. J

    Another Wheel and Tire Question

    I played for years with tire/wheel combinations on my single owner '77. The OE wheels were not ideal. The rim comes so close to the tie rod ends that wheel weights get knocked off or at least get grooved. I went with Kelsey Hayes 15"X8" steel wheels for 70s Dodge Ramchargers. They have a 4"...
  2. J

    Synthetic fuels as clean as an EV?

    None of this is new. The Natzis were doing this in WW2. They made hydrogen from wood. They called it Holzgas. So now this 80+ yr. old "technology" is cutting edge.
  3. J

    U13 bottom of windshield rain gutters

    I'm sure they can be easily fabricated, but I can't see what purpose they serve. Water would still run onto the top of the A pillar. If that isn't sealed water can fill the A pillar, at least on the late ones that are closed on the bottom. After replacing my driver side A pillar I know some good...
  4. J

    China Fuel PUMPS, ARGGH JUNK

    The lifetime warranty is a joke since it never covers the labor. I spent a weekend replacing 4 fan clutches on a Crown Vic. All were AutoZone and made in China. The thick goop inside leaked out making a huge mess. I gave up and went to a real parts store to buy a Hayden. It lasted for years till...
  5. J

    More HP from 302??

    The fact that only 1% of EB owners use stock or near stock tire sizes is a function of the group think that we see in EB owners. Land Rover owners are clearly more able to think for themselves. Talk to some of them and ask why they don't have 35" tires and lift kits. I have and they are firm in...
  6. J

    More HP from 302??

    This whole thread was started with the question of how to get more horse power from an EB 302. I stayed out of it because the question doesn't, if answered, improve drive ability or utility of an EB . The question needs to be "how to improve low end torque?". That was evident when I bought my...
  7. J

    Cross roads on engine block - Machine Shop called

    There wasn't a Bronco block just '71 302 blocks and a lot of them. So the most anal restoration could do no more. I don't even think anyone would look that far. An EB isn't a Vet or Boss 429. I agree if 0.040" over bore isn't enough, get another block.
  8. J

    2nd fuel pump weep hole leak in less than 100 miles

    The oil mist from the weep hole is by far the most common fuel pump failure in my experience. The timing chain, sprockets, etc. sling oil at the pump arm and crank case pressure pushes it past the seal. The reviews I've seen over the last few years have not been good for Carter. I can only...
  9. J

    Dash pads

    I'm sure Todd's book is very accurate. My info is physical evidence, in that I'm the original owner and mine never had a dash pad. The screw holes never had screws in them. I didn't get a chance to order options when I found Ford had gone to a shortened F150 and dropped the real Broncos. It was...
  10. J

    4-barrel recommendations

    The best 4bbl carb for a 302 is the Autolite 4100 480 CFM. A quality rebuilt version is expensive and DIY requires some carburetor knowledge. A 450--500 CFM version of any carb fits you're needs. The idea of leaving anything on the table is BS. It only applies to full throttle high RPM...
  11. J

    Dash pads

    They were optional in '77's so I guess that was one of the early years.
  12. J

    351 aluminum inatake install questions

    The cross over passage that heats the intake air uses exhaust gases.
  13. J

    Dash pads

    They were optional and as far as I know were all black.
  14. J

    Super Celebration Wisconsin!!

    Growing up in the Chicago north side and suburbs, Wisconsin was the #1 weekend destination. My family had a large contingent in Portage so we were in the Dells often. I wouldn't worry about the cold in July, but mosquitos can be a problem. There are several big fireworks displays on the 4th so...
  15. J

    Heater air box gap from box to cowl- fix?

    The real problem is the fact that only a small percentage of existing EBs are still Broncos. That problem is exasperated by the fact that few current owners even know what a real early Bronco looked like. So it's not surprising a new owner would imagine what they think is real. Too many past...
  16. J

    Am I missing something easy... timing question

    There's much that needs to be said on this subject, that I'll just sight a couple good articles to read;https://www.fordmuscle.com/archives/2000/03/timing/index.php and ;http://vb.foureyedpride.com/showthread.php?22229-The-Ultimate-Duraspark-Distributor-Timing-Guide.
  17. J

    351 aluminum inatake install questions

    Plugging the holes isn't insurance, it's the only way to avoid coolant pouring out of four 3/8" holes. You wouldn't be able to fill the radiator before the coolant flows out.
  18. J

    70 Bronco caught fire

    I agree HEI is simpler the article above points that out. The more sophisticated Duraspark came out later and therefore included features like a 4 degree timing retard to ease cranking. The ignition is wired to the ignition switch not the starter relay. Just like points. The module has to be...
  19. J

    70 Bronco caught fire

    After reading the above article it's apparent that there is no advantage to the HEI over Duraspark ignition. So why would anyone substitute parts of the Duraspark system with inferior parts made for other systems? It's not as if Duraspark parts are prohibitively expensive or hard to find. The...
  20. J

    C4 Modulator

    I've tried both the yellow and green stripe modulators and found no difference in transmission operation. I just ended up using the yellow one that was OE. The above chart is informative but doesn't include Broncos. My '77 Ford truck shop manual doesn't discuss the modulators. So going with the...
Top