• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. JSBX

    Cup holder install.

    Good idea on the cup holders and they look great.
  2. JSBX

    What are you using for the upper rad hose-Explorer front dress- standard rad fitting orientation- BCB brackets- sag pump

    I just checked some pictures I had on my phone of my other Bronco and it does have the standard T housing and it also has the Gates 20983 hose on it.
  3. JSBX

    ISO shop to help 4r70w Transmission over heating

    You can get in touch with US Shift and they can talk you through how to check and adjust line pressure using a lap top. I had to do this when I first installed a 4R70W in my 69.
  4. JSBX

    What are you using for the upper rad hose-Explorer front dress- standard rad fitting orientation- BCB brackets- sag pump

    I am using a Gates 20983 on both my Broncos. Both have the same set up as you. One has the 90 deg. t housing. The other has the standard t housing I think but it is not where I can check it until Monday.
  5. JSBX

    4r70w Swap - Couple Questions

    I have almost the same set up as yours in my 74 except I have 4.56 gears. I used the stock torque converter. It seems to work good for me. The transmission shop that rebuilt my transmission got the TC for me so I can't say where the best place to get one from.
  6. JSBX

    MERRY CHRISTMAS !!!

    Merry Christmas to all!!!!!!!!!!!!
  7. JSBX

    What gear ratio should I run?

    I have 2 Broncos with 4R70Ws. one has a mild built 351W and the other a mild built 302. Both with 35s. The one with the 351 has 4.56 gears that work good but I think 4.88s would be better. The 302 has 5.13s that work great. My vote for your set up would be 4.88s.
  8. JSBX

    AR OCBR 2023 Parts Swap, Sale, Beg, Buy, Borrow.... POST UP

    How long is your front driveshaft? I may have a couple of them.
  9. JSBX

    AR OCBR 2023 Parts Swap, Sale, Beg, Buy, Borrow.... POST UP

    Weiand 4 barrel aluminum intake for a 302was clearance for a hei distributor as seen in picture other than that it is in good condition. $100. 2 Holley 670 truck avenger 4 barrel carbs. Have been on a shelf in my shop for 5 years. They both ran good on Broncos before going efi. May or may not...
  10. JSBX

    AR OCBR 2023 Parts Swap, Sale, Beg, Buy, Borrow.... POST UP

    4 Penney hole aluminum wheels. 15x9 with 3.750 back spacing. These wheels take the shank type lug nuts that I have a new set with washers that will go with the wheels. They are not show quality and are not clear coated but in good usable condition. Asking $150. Dana 44 ring and pinion with...
  11. JSBX

    AR OCBR 2023 Parts Swap, Sale, Beg, Buy, Borrow.... POST UP

    I have a receiver hitch like the one from Toms. $100 Back seat. $150 Mustang front dress. $40
  12. JSBX

    Another 4r70w thread

    I cut mine with a die grinder with a cut off wheel. I found a piece of pipe that fit over the shaft cut it to where there was 1" of shaft sticking out after it was slid as far as it would go on the shaft using it as a guide to cut the shaft straight. Then cleaned up the splines with a 3 corner...
  13. JSBX

    Swapping to 4R70?

    Check out the Bronco tech section and Google, type in 4R70W Classic Broncos. and you will see post on the subject. There is also some You Tube videos on the swap.
  14. JSBX

    AR OCBR 2023 Parts Swap, Sale, Beg, Buy, Borrow.... POST UP

    I have a 37x12.50x17 Hankook Dynapro XT mounted on a black Method wheel 5X5.5 bolt pattern. Tire has very few miles on it but the wheel has some curb rash. If interested PM me your phone number and I will text you some pictures tomorrow. Will take $100.
  15. JSBX

    Clutch replacement and leaking rear main seal.

    That 58 F 100 looks great. You did a good job on that truck. Another vote here for pulling the engine.
  16. JSBX

    NH Whats it worth? Thinking of selling my 1974

    Two of my sons each just sold one of their Broncos in similar condition as yours. One a 73 the other a 76. Both with older paint jobs but not as many upgrades as yours. One still needed some body work but they both had tops, one a half cab and one a full cab. They sold in the mid to high 30's...
  17. JSBX

    Fuel injection problem?

    If this is a mustang EFI there is a lot of good information on the Fox body Mustang forums. I bought a 69 Bronco with Mustang EFI and knew nothing about EFI. I have learned a ton by researching on these forums. Learned how to test different ignition components, fuel injectors and other EFI...
  18. JSBX

    Tools you didn't know you needed & can't live without?

    Power Probe 3 for trouble shooting electrical problems. Not only is it a test light but a voltmeter also. It is a lot easier when you can add power or ground to a circuit that you are testing with just a push of a button while you have the probe on the circuit. Plus, it has an audible alarm for...
  19. JSBX

    New 351w Spark Plug and Gap Recommendations

    I am running Motorcraft but don't remember the number. I think I just used what was recommended for the Explorer.
  20. JSBX

    New 351w Spark Plug and Gap Recommendations

    I am running a DUI distributor. The .054 gap it what I found online that is recommended for a 96 Explorer should be set at. I have not played with the gap but seems to work good. I have the GT 40 heads off the 96 Explorer. The 93 mustang GT is also recommended .054. 93 Cobra .050
Top