• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. Okie69

    Differential Shop in Oklahoma

    I know there are a lot of guys from the area on here. I’m looking for a trustworthy diff shop in central/northern OK. Recommendations?
  2. Okie69

    Limited Slip and Gears

    As many of y’all have seen in my other threads, a sim me bearing replacement has turned into a full on rear end rebuild. So I thought I would start another thread to clear up some of my questions and to ask for advice. I have 35s with a 3.5” SL and a narrowed HP D44 going in the front. 1. I...
  3. Okie69

    3 Speed Manual Steering Column Disassembly

    I’ve opened up a can of worms and need some assistance getting the lid back on. It’s a ‘69 with a stock 3 speed on the column. I took out the bushings for the shift linkage to replace them and it looks like I have to remove the arms completely to install the new bushings and I figure there’s...
  4. Okie69

    Debris In Axle Tube

    While I'm deciding what to do about my engine woes I thought it would be a good time to go ahead and put in new bearings and seals on the rear end. Once I pulled the axles I noticed a large amount of sand, rust and what looks like mud inside of the axle tube. I am pretty sure I shouldn't leave...
  5. Okie69

    Cracked Block. Options?

    Well guys it looks like the joy of getting the Bronco out of storage is short lived. Went to pull the engine to do a quick flywheel change and freshen up, and found a nice big crack in between the two freeze plugs under the motor mount. It was in storage for almost a decade and I went up...
  6. Okie69

    D44 Assembly

    Hi all, I've found a local shop to put together my HP Dana 44 which is fantastic as they are literally 1/4 mile away from my house. He asked that I get all of the parts and pieces together and then he would handle the assembly. The question is, what the easiest way to get everything I need...
  7. Okie69

    Looking For A Shop In Northern OK

    Hey everyone, I've been out of the loop for awhile but it's time to get back in. my Bronco has been sitting idle for a couple of years, and I'm over it! I did an engine swap at one point and I messed up a few things I know. I also fudged up the mechanical fuel pump install and ended up ripping...
  8. Okie69

    Confirmed! Bronco to return by 2020!

    It finally happened, now let's hope they get it right! http://www.roadandtrack.com/new-cars/future-cars/news/a32196/new-ford-bronco-official-photos-info/
  9. Okie69

    Date stamps?

    I found this on my '69 the other day, it got me wondering. Are there any other places/parts that are stamped like this? Mine doesn't have the original vin tag or anything so I thought it was cool to see an actual date on it. I wonder who has the oldest date stamped part? Hmm....
  10. Okie69

    Good job Build a Bronco!

    I'm sure a lot of you have seen it but I was just really impressed so I thought I'd spread it around a little. I want!
  11. Okie69

    What did I do now?

    Finally got the Bronco running like I wanted. Took it out for its inaugural Sunday drive and everything was going fine. Stopped a stop light and took off in first, when I tried to shift into second it wouldn't budge. Now it won't shift at all from the column not even into neutral. I can make it...
  12. Okie69

    Oh the carnage!

    Happened a little while back, but I just got around to taking pictures. D30 -0 35's -1 I read quite a few posts about 35's and a D30 not playing well together. Good thing I've got the HP D44 sitting in the garage already!
  13. Okie69

    Accelerator pump issues.

    I just put a new carb on and the accelerator pump is really stiff. The spring on the throttle linkage is not even close to strong enough to press it. Is there a way to fix this? It's causing the engine to bog pretty badly when I press the gas and it will work just fine if I press the throttle...
  14. Okie69

    OK '69 not mine

    http://tulsa.craigslist.org/cto/4348460744.html Looks like it might be decent if it could be had a little cheaper. 351 looks clean.
  15. Okie69

    Wrong harmonic balancer?

    Anyone getting sick of my questions yet? Haha The new motor I recently installed turned out to be a HO 302 I used the balancer from my original 302 I have a pretty noticeable vibration at higher RPM. It's the balancer isn't it? Is there a good place to look for a replacement and what do I look...
  16. Okie69

    Oil pressure dropped to 0.

    I had good oil pressure and all of the suden it dropped to 0 and stayed there. What happened? I was only a minute or so from the house so I made it home,but now I'm worried something major might have happened.
  17. Okie69

    New motor, same problem.

    So, some time ago my old motor lost power and wouldn't go over 35 MPH I figured something had gone very wrong internally and just opted for a new long block. I found a motor from another member on here and installed it, putting all the parts (intake, carb, timing chain cover etc..) onto the new...
  18. Okie69

    Dating an engine.

    Quick question. Is there any way to date an engine? I'm have timing chain cover and fuel pump eccentric issues and I hear it might be something to do with a difference in timing chain covers from my '69 to the new(er) motor.
  19. Okie69

    Bronco sighting, Stillwater, OK!

    Saw this bad boy on homecoming weekend in Stillwater. Belong to anyone on here? Super clean rig. A little too burnt orange for a poke fan, but to each his own haha.
  20. Okie69

    OK Glove box for my `69

    Looking for a glove box someone might have lying around. I've got the door and button just need the actual box and whatever the latch catches on. Thanks guys.
Top