• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. B

    Power steering ratio change

    He's the one that mentioned the 78/79 box kind of confusing the post. Only one person mentioned the 2wd box. In the past I had found some info that you could change the ratio of the 6 turn EB box by using a S10 box but honestly I dont know this is a absolute and Im not sure of what years. I...
  2. B

    Valve Cover Suggestions 11R Heads & Explorer Front Dress

    Couple of options here roller rockers dont require poly locks you could run the older self locking nuts but yes poly locks are nicer. Might want to ditch the york compressor the sandens work just as good if not better and a smaller package.
  3. B

    Autolite 2100 jetting for ethanol blend

    Yes there is some science to getting jetting its best and it is or can be different for similar engines/vehicles. Bottom line is math really wont do the work. An A/F ratio gauge is really helpful and reading the spark plugs is a must then determining how your vehicle responds to changes and if...
  4. B

    Hydraulic throwout with stock 3 speed in my 66

    Id find a mid 80s f150 with a 300 6cyl bellhousing it had a external slave cylinder much easier to deal with than the mcleod unit and way cheaper. The bellhousing should fit the 250. Then you could get off the shelf parts when needed instead of a specailty part.
  5. B

    Twisted wedge heads

    Ditto the 53cc heads would be pretty small chambers for a stroker and may not leave much for future machining. Highly doubtfull you could run on 87 with 53cc chambers. The 66's may be a little better choice for pump gas. And they could be machined down to get smaller chambers if needed. You...
  6. B

    New poster im working on - poll (go to new poll)

    #2 how about Dream Build Dream about driving Build Drive
  7. B

    Winch muscle, how much is really necessary

    To the OP I think your decision of a 8k is sound. Pretty much you say occasional wheeling. So there probably is no need for lots of the factors people state. Yes there are lots of factors as other have mentioned but you may never need it. So a lot of the info is just candy. having a winch...
  8. B

    SOLD Lowered price to $250 NP 435 with AA D20

    There have been several versions of the adapter depends on who made them AA ones were pretty much all aluminum one piece. Other versions used plates and some had a plate welded on a stock 3sp adapter. Havent seen one of the half and half versions but Im sure people have done it. Not sure you can...
  9. B

    New FB body uncut. What do I need to LUBR?

    If your wife bought you tires I think she would understand that you need different ones to fit probably could get them swapped out easily for no money and even better if the type of tires you got now are availible in a 10.50 then you could swap and she probably wouldnt even know.
  10. B

    Holley Carb setup

    Id say your still running lean and probably need to rejet the carb to get that high speed performance. As was said earlier a stock pump is 4-6psi you dont need or want anymore than that. Those 8psi pumps are only good for racing where your at full throttle. On a street engine they may only cause...
  11. B

    Wreck Rebuild Project

    Surprised the drivers seat is still upright. looks like he may have had a hold of the wheel at the time. Good luck with the rebuild.
  12. B

    72 302 Rebuild

    Id do it yourself.As you already know the experiance your son will get is the real benefit. Cost is about the same its not that hard and you get exactly what you want not what ever comes in a crate engine.(usually stuff you didnt want) Take your block to machine shop have them check the bores...
  13. B

    NP435 with 65k miles worth $400?

    $400 would be a good price if it had a bronco adapter on it already. As was mentioned its not the trans your looking for to big of input shaft and proabably has a 31 spline output as well and could have a output mounted park brake. While I see prices in the $200 range I know a junkyard I can...
  14. B

    6R80 (or new 10 speed) behind small block ford

    Well if you consider how automatics work (torque converter factor) 4-1 is not that much. Theres a reason there 6 speeds they tend to shift fast now yes you can probably leave it in 1st while wheeling which is helpful and it may take off and have less strain on it with your gearing and tire size...
  15. B

    72 302 Rebuild

    I personally wouldnt use those pistons that dish they have are for low compression be lucky to have 8.2-1. even with 58cc chambers. If cost is a factor You may be better served forgetting the heads getting the short block done right. You can add heads at any time. Id want to shoot for about 9-1...
  16. B

    AZ Bronco Stampede coming soon FREE FREIGHT!!!

    The club needs to get there site running again. As nobody can get to it or maybe its just me. But thanks for the link Jefe. Been waiting for them to open up registration for awhile. Now have to consider if I need anything from WH.
  17. B

    6R80 (or new 10 speed) behind small block ford

    All your gaining is that 4-1 first which is not much of a gain in a automatic, Sticking with 3.5 axle gearing and 33/35 in tires would make both OD gears pretty much unuseable. As you are pretty much already in OD in 4th at 1-1 Probably better off with a 4r70w. cheaper contoller, no block...
  18. B

    Why does "Classic Ford Bronco" lie so badly?

    The second link says listing format chinese So really winds down to which one is the real ad.
  19. B

    MI Kind of a Bronco but def not a Possible tow rig!

    Nothing about it would make it good for towing anything beyond a harbor freight trailer
  20. B

    Need serious Advice - Rebuilt for return?

    He has a NP 435. Its the only one with a aluminum top cover. My suggestions if your just looking to recoup some of your loses. Would be to get another np435 and put it in usually you can get them for $100 rear diff is no big deal but Id probably at least pull it to see what it is if its lincoln...
Top