• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. B

    Vehicle modifications and DOT

    Sometimes a shady area but will most likely come down to interpertation of what is compliant for use vs legal or illegal. Parts manufacturers are supposed to self certify that parts are in compliance with FMVSS and any other pertaining regulations. It could be that things like Hiems could...
  2. B

    Name this Carb

    All the rebuild kits should be the same and every one that I have ever gotten works for both the 2150 and 2100 carbs there are only minor differances in gaskets. They are simple carbs no real complexity once you've done it you'll say wow that was easy.
  3. B

    roller or flat tappet cam motor build

    While a roller motor is a little more desireable there is no real noticeable gain from going to one. While a roller cam is more or less easier as far as engine break in theres really nothing wrong with a flat tappet. There are still millions of flat tappet engines running around today and...
  4. B

    2019 events

    Maybe a good idea would be to post up a possible date and place so people in your area can get on board. A decent way to start is do a meet and greet at a local restaurant or bar/grill with a possible trail ride as well. Once you can get some people together and if there is enough interest you...
  5. B

    Any updates on dual vs single plane manifold, and TBI's?

    You can find good used torker 289 manifolds on ebay for pretty good prices. I ran one on my bronco for years. Now it sits on the shelf. Did take some carb tuning to get it running good but I never had a issue with it. Plus it really seemed to open up at high RPM which is what it was more or less...
  6. B

    Factory Power Steering ?'s

    Stock look also had a double groove water pump pulley. You can pretty much get a power steering pump and brackets off about any early 302 and it will be stock look. I ran the stock thompson pump for years never had any issues with them If the pump is making noise most likely its worn out or was...
  7. B

    Brakes are lacking lockup

    Id say pads may be a big factor in poor braking. High dollar fancy pad generally need a lot of heat before they start working good. Usually the old tried and true semi metallic pads are your best bet. Carbon or ceramic pads sound like the way to go with there claims but they both require lots...
  8. B

    RC bronco

    Not sure if this has been posted but found this at walmart. 1-15 scale RC bronco rockcrawler. Couldnt pass it up.
  9. B

    Non-Highway tires

    There are several different agressive offroad tires that will do what you want tall and skinny is usually the key. Another option is tire chains they work pretty good in the mud. 16in wheels may be the way to go as there is always the old traction lug tire that work real good in mud and you can...
  10. B

    Open Rear End in 69 with HD Package

    The HD package had several versions I dont have the 69 info but usually there were 2 or 3 versions of it, If you had the 4900lb version then limited slip was pretty much required but lower versions it wasnt. best thing to do is check the VIN tag what is the axle code? if it has a letter and...
  11. B

    Carb Questions

    Yes tuning is in order. You can download tuning instructions from edelbrock you will probably need a tuning kit edelbrocks are pretty easy to tune. Bad part about the edelbrock is they dont do good offroad but they are goos on road. Along with carb tuning you may also need to adjust igintion...
  12. B

    Carb Questions

    carb manifold ect will run you $500 or more if bought new. Dont get me wrong I like aftermarket stuff but for the most part there is nothing wrong with the stock 2v carb it really cant be beat. Easy to tune as well. Learn how to tune what you have which may not need any tuning but you can fiddle...
  13. B

    Scoop's 72 Patina Build

    Nice I'll have to get a pic of my 73 dash pad its about as bad as yours. my 71 is getting there to. Im not replacing them until I get some shade built. The AZ sun tears everything up
  14. B

    Is it possible to track down a vehicle my Dad once owned?

    Bad part is that old vehicles in the eastern US are few and far between due to the rust issues. You could get lucky but highly doubtful.
  15. B

    Daily driver advice

    As others have said theres things you can do to make the drive better. wipers are a easy and cheap fix. I have several sets of cherokee arms and ford delay switches. But Im considering on another mod to cherokee arms because the replacement blades are not as easy to find as some others are...
  16. B

    Stock Ride shock preference

    You really need to determine what about your current ride is bad. Sometimes just decent new shocks make all the differance. Most stock broncos seem to ride decent if you have a rough ride either the current shocks are worn out or too stiff. Along those lines it could be a worn out sagged...
  17. B

    VIN # Ranger or Sport!!

    Heres a little reading for you. http://classicbroncos.com/forums/showthread.php?t=86338&page=2 Pretty much what everyone else has said. Your biggest indicators will be the color matched dash and rear panels make sure that there are metal strips welded to body for attachment on bottom and wheels...
  18. B

    Power Steering and Power Front Disc Brakes

    Do the disc brakes first thats a big improvement over the drums. For H Boost you will need power steering for it to work. Now you can usually find used power booster setups for decent prices in classifieds as people upgrade to Hboost. or just stay with manual brakes until you do power steering...
  19. B

    Torker 289

    Wont hurt to rebuild/clean the carb but for the most part I doubt its your issue. the stock carb has its jets on the bottom of the fuel bowl so even if float level is low it really wont affect the fuel metering. But a bad power valve can cause all kinds of funky issues if the diaphragm has...
Top