Search results

Well, anyone want to get the whole truck? LOL was running untill an engine fire so everything should be fine other than the engine wires and stuff on top of the engine. They where out in the fied doing work and had to throw sand up on the engine to put the fire out but there is a filter on the...

Boy whats wrong with all these PO's. LOL it took me about 3 hours to get that tank drained and out of the bronco. It would have helped if the bolts for that tank straps where not so damaged.%) I still smell like OLD gas even after a long shower. Anyhow i have started removing the drivers floor...

What lets you know that the Front end is a Dana 44? This is what made me think the front end was a Dana 60. This is a pic of a Dana 60 off another website. This looks The same as the hub on my F250. They said this was the easiest way to tell them apart but maybe there is something else im...

So the front is a Dana 44. I guess the front hub would be the same size as the rear if its a Dana 60. LOL would the brakes work on a Bronco Dana 44? Mike

Here are some pics. maybe these are not Dana 60 units but they sure look like it to me. Maybe you guys can tell what they are from the pics i could get today. It was real wet around the truck so it was hard to get under it for good pics. Mike

I have a 79 F250 4x4 that has a Dana 60 front and rear ends. I was going to restore the truck but i don't have time for it and with my other projects and now this bronco i just got i know i will not have time. I was wondering what these units would be worth. I know the front is a Dana 60 and i...

I already need to replace my front floor pans and the kick panels also have some holes in them. Should i patch the holes in the kicks or replace them? There is still lots of good metal in the kick panels and from the looks i would have to remove the door post as well as the rocker to replace...

I have been striping out my 72 bronco and found that someone had screwed new floor pans in over the original pans just for some minor rust in the forward part of the pans. Well i get the passenger side pan pulled out and find only one hole near the kick panel so im happy with that. I get to the...

Thanks for the info. I was worried about the tail light panels but what else can i get? These need to be replaced being the bottom is rusted out and they have both been smashed in some. They have a note stating that the tail light panels they have now are much better than before so maybe there...

Anyone figure this out yet? i have a 72 that i want to make this mod to. Mike

One other question. I would like to get this stuff on the way early next week at the latest. Do you think Jeff's will be able to get it all shipped out fast of do they take a while? I tried to call but there already closed. :-( Mike

Im about to place an order for all sorts of new sheet metal parts from Jeff's but before i do are there any fitting problems with any of the parts they sell? Here is a list of the parts im going to get. Fenders Tail light panels floor boards lower tail gate panel OEM grill shell and Stock...

Any updates on this Mass buy? i would be in on this if it was around $400 shipped. Let me know what happens. Mike@aerolockmodels.com Mike

I have a 44. Thanks for the help guys. Mike

Its a 302 from what he said but i guess it could be a 289 though. As far as i can tell the balancer has not been removed lately. When driving it does have more vibration and when you push in the clutch the vibration gets even worse. Im sure the wheels are out of balance and the drive shafts...

Looks like Ball joints to me but then again im not sure what a king pin is. LOL Im about 99% sure it has ball joints but just to know what are king pins? Mike

I Found out the transfer case is a Dana 20 but how do i find out what the front end is? there is a plate on it with a code but i cant seem to find any code info to let me know whats under this bronco. Also the drive shafts seem to have some play in them, is this common or should it have no play...

They seem to be bolted down tight. The motor does not rock bad when you gas it so i think the mounts are fine. I will check them out some more though. Mike

The bronco i just bought yesterday has a fairly bad vibration when the engine is running which even gets worst when you drive it. Could this be a balancer problem or maybe the wrong balancer was installed on the motor? I have had many other classic cars including my 454 69 camaro i have now and...

It has a 351M from what i have been told. It looks like a Clevland but everyone said its not. Mike