Search results

Thanks for the info. Lucky me i had the passenger side floor out to weld in a new one so it was easy to see the VIN on the frame. I can rest easy now that the frame VIN matches the Title. Now i need to get a new plate. Where on a 66 should the VIN plate be? Mike

I purchased a 66 Bronco a few months back and i have been unable to locate the vin on the body. The door has a VIN tag but it cant be factory from the way it looks. The glove box does not have a VIN tag and the kick panels have been cut for speakers so there is no VIN there. I got the Title with...

OK, maybe it was 69 when the door frames are welded on the doors. What ever the case will the door skins work with the removable door frames? Mike

Thats not a big deal. What might be a big deal is how the 66 doors have the removable door frames and the 68 up do not. Mike

Any aftermarket Door skins for a 66 bronco? My drivers side door might need a new skin or someone very skilled with a dolly and hammer. The door has a crease from the bottom to the door handle and the PO had a good 1/4" of bondo in it which i did not know untill last night. Can the skin for a...

If i dont replace the motor soon i will see about getting it fixed. I only drive this bronco without a top so i dont know how much of a threat the fumes can be. I can get about 3 bolts out the rest im sure will break off. I just hope the head breaks off and i have something to grab on too after...

I have a 66 bronco that has what looks to be a 67 200 CI from a comet installed. The problem is that the exhaust gasket is almost totally gone on the rear two cylinders and you know what that does. LOL Anyhow i have been trying to remove the bolts and there all stuck even after heating, beating...

This has nothing to do with what you did but just how tight should the two sections of a drive shaft be. My 66's drive shafts has some slop in them so do i need to replace them or can they be fixed. By the way getting a drive shaft shortened and balance here in GA only cost about $50 - $75. It...

If it was a duramax, it would have been a great kill. I have a 01 GMC with the duramax and it will flat out fly. To bad the injectors went out and filled my crank case with Diesel. It has been in the shop for a week and will be there a few more. After that its getting traded in on a F250. Be...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7914159724&category=33615#ebayphotohosting The bronco is a 66 with 170 I6. I will upgrade to a 302 later on when i have more time and money. Mike

Oh ok. I thought it might be something like that. But how does the transfer case slit the ratio like that? Does that work with the Dana 20 or is it a different setup? Mike

I see lots of post about a Twin stick setup. What is that for? I might be wrong but to get into 4 High i push the stick forward one notch and to get into 4 low i push it all the way forward. Why would you need two sticks? LOL Mike

Im working on a 73 bronco i got for my wife for mothers day and she requested a bench seat. I like the idea myself but i thought i would ask to see if anyone has seen or installed a front bench seat in there early bronco. If you have pics let me see them. Thanks Mike

LOL, good. I looked at it some more and there is no way it could not be normal. Mike

Just wondering how you guys are attaching pictures. The pictures i have posted were hosted on my website. Looks like you guys are loading the pics right into this website though. Mike

Radiator support is leaning back some. Is this normal? Its not leaning back much but you can see it and its the same on both sides. I do not see any damage that would cause this so i guess its built that way. Anyone want to look to see if there bronco is done the same way? Mike

Great, Im busy with other stuff right now but as soon as i get time to get the tub off i will have it blasted and then spray the Rust bullet on the whole thing. How much will be needed to put on two heavy coats on the whole tub? Mike

Is that rust Bullet sandable? Im about to pull my tub and get it blasted and replace the floor pans and after i want to do the bottom and top with rust bullet. What im thinking is just spraying it on and letting it feather out on the outer sheet metal or maybe just sparying the whole thing and...

I had bought a 66 GT mustang fastback project a while back which came with a T10 4 sp. Would the be a good trans for a bronco? Not planning on rock crawling or anything. Mike

Sent an email. Mike