Search results

I'll find out lol, I haven't had a chance to drive it yet with them on.

Last of my parts showed up this weekend! I ordered the wrong front shocks in January, but thankfully Wild horses swapped them out for the correct valved ones. I also had to get their dana 20 cover! Bronco is ready to hit the road! I'll see you all in Colorado

Installed my new air filter and secondary electric fan. Still need to find a pre filter for it though.

No pictures tonight but I got the reverse lights hooked up to the trans, transfer pump is all wired in and working, new tail lights installed, and I started flushing the power steering.

Slowly wrapping up stuff before the road trip, got the fuel pump for the aux tank plumbed in and got the awning on to hide from the rain and sun.

Got mine installed, going to make driving in the rain soo much nicer!

Most likely, also check the back of the intake.

I don't even want to know what I've dumped into my pile of rust 🤣

Fresh coat of paint and sitting in place! Now all the small stuff to get it driving again. Ps I forgot how freaking heavy these are when you're trying to get those 6 studs in place!

Got the transfercase put together last night, I wasn't able to use the HD output due to my vss adapter. I'll order the HD shaft kit when I get back from my road trip. I'll get a fresh coat of paint on it tonight and get it installed tomorrow and driving again.

I started rebuilding the tcase yesterday until I hit a snag, waiting to hear back from advanced

Lookin for a wide ratio kit for an aod, if anyone happens to have the old Ford motorsports kit laying around let me know.

Yes! I plan on hitting moab afterwards as well. Probably the only time I'll be able to do this until I retire lol

Yep! A little over 6 weeks til I head out! Bronco is about wrapped up with a couple upgrades too.

Adding fluid today, in a big crunch. I also need to rebuild the tcase sitting on the bench. Leaving for super cel west in about 6 weeks.

Had a productive night last night, new pan is on, new driveshaft is in, and I put on some header wrap.

The kit came with a rod, I had to cut about an inch off. I think it was designed to work with a 3" body lift. I also put a slight bend in it for batter alignment. Yep aod.

Finally installed my lokar column shift kit.

See the difference in the two springs? One is flat

I have a typical ABC type as well as one of the element extinguishers.