Search results

Still looking for one more 16" ford wheel exactly like in the pictures. Thanks John

Correct...f100 worked for me. http://dennis-carpenter.com/window-crank-shaft-repair-kit/p/B6C-8123205-S/ f100 on left...middle 66 bronco...right falcon. Thanks John

Heads up! The falcon part did not work for me...wasted my money on a set. I will hopefully sell them on EBay to recover a little cash back. Thanks John

Thanks okie! I am seriously so busy with restoring my once rusted 73 it was hard to find the time...want to get it done so I can sell it and get back into the 66 world...just trying to help a friend and anyone else with this issue. Thanks John

pm sent...thanks!

Hopefully this save some people some time by avoiding my mistakes. Also, I hope the 66 handles fit...LOL! The 3/4 deep socket is the key and helps keep the part from to much deformation. If anyone finds any better or mistakes Im still making please comment. Thanks John

Now install new shaft and reassemble with rivets or whatever works for you. I haven't done that part yet.

take the part with the shaft and use a 3/4 deep socket add some heat and knock out or use a press...I did it both ways on a couple...note the direction it removes from...this is where I was making a mistake.

pull apart being careful to note hoe the spring inside is attached...once apart remove gear.

1st grind rivets and remove

After lots of trial and error I figure how to get the new shaft installed. I first was trying to push it out the worn direction...then used a grinder...finally when I discovered how it was built and wasting a couple driver regulators I figured out the easiest way to do this. The Part I listed...

looking for a 66 rear view mirror like the one in the picture. Thanks John

this is the one I ordered.., http://dennis-carpenter.com/window-crank-shaft-repair-kit/p/B6C-8123205-S/ I will post what happens and take pics... Thanks John

I have good pass sides I can get parts from for myself. I was trying to help a friend and anyone else that had this problem. I ordered a f100 shaft today...I will post if it works. Thanks John

I have searched for them via internet but can't find any that look like my 66...I took one apart and will add that pic. Thanks John

Anyone know if there are replacement window shafts for the 66-67? I know the 67 take the screw through the top but they work for the 66 handles. All the replacement ones sold, do not stick out far enough to work for 66-67 handles. I tried an early falcon replacement one and the housing hits...

super correct early u13...those hoods are super hard to find!

download the diagram from this link http://www.bronco.com/technical/wiring.shtml its mostly is for a 67 but got me through my issues a few years back. i had to pull the harness, change fusebox and connections. hope it helps!

IMO...to many out there to be a budd body only item...I have bought so many over the years...I call it my 66hornbuttonitis...I see one, buy it, then compare it to the other and sell the worst...usually for less than what I paid. Currently have one good one...Is the one you have for sale? LOL!

https://hanford.craigslist.org/pts/6140642847.html had a bronco with a vin on the body and frame that didn't match... went to chp and both vins came up as the same licence plate and title...as long as it is done right you should have np swapping frames. john