• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. wesleydax

    Caddy caliper e-brake holding power

    Hi all. I have started using the bronco a lot to pull the boat. I already have disc all way around and they work great. I want to add e-brake capability. I have chevy calipers on the back now and thinking about swapping to the caddy e brake calipers. for those using this type caliper how well...
  2. wesleydax

    P0300 cold start stumble

    99 5.0 efi. after it sits for over an hour ish. It will stumble and almost want to die. Does this for about 15sec and then clears out and runs great. No throttle responce issues, ac compressor cycling on and off does not faze it. If you shut it off and crank it back with in the hour ish it...
  3. wesleydax

    9" bearings. which ones

    I have an axle seal leaking and obviously need to replace it. Can an of y'all tell by the picture which bearing I have? I think its large bearing but its been a good 25 years since I've been in to this thing. Is there an up graded bearing and seal now. I do remember last time having to put...
  4. wesleydax

    do lug nuts go bad

    so ive had my current wheels which are eagle alloys for about 15 years ish. and as i was driving it down the drive way yesterday i hear a clicking type sound turned around came back and the left rear wheel lugs are loose. tightened them back up with an impact then breaker bar. drove a few...
  5. wesleydax

    efi backfire through intake

    need some ideas, I just finished my 99 5.0 swap a week or so ago and it ran fine. had a few leaks so didnt drive it again till today after getting them fixed. Now it pops back through the intake after reaching cruising speed. if im accelerating its fine. i ran it up to 75 and it was smooth...
  6. wesleydax

    Another tire question

    well i finaly finished the explorer and aod swap. and went for a drive. all is good with the swap but it felt sqishy in the rearend. came back and checked the air pressure, they were all off aired up to 28psi a little better but not great, feels like something in the rear springs is loose. I...
  7. wesleydax

    How to search forum

    Is there a way to link words together in the search option? I am by no means a computer guru, and have tried to search some things. Thanks
  8. wesleydax

    hot in start wire?

    which wire is it that is hot in start on a 71? I think it comes from the voltage regulator area just cant remember. Ive asked this before but i cant figure out how to search for it.
  9. wesleydax

    molded in flares

    I am gathering ideas for a fall/winter frame off. it didn't start that way but oh well that's where it will wind up, there's no good stopping point. Does anybody have any pictures of flares that have been molded into the body? i have the typical fiberglass pop rivet ones and just looking for a...
  10. wesleydax

    71 gauges 99 motor and harness

    I just bought a 99 explorer with 5.0 auto that im going to swap into my 71. ill use the 99 harness to run the eng and trans. My question is the gauges. do i just hook the 99 harness to my old gauges? will it still need the voltage thingy on the old gauges. also the explorer has the chip key. i...
  11. wesleydax

    will a 91 f-150 engine swap work

    I have found a 91 f-150 with 5.0 and auto for cheap. is this the motor i want? is it the mass air one? i know the intake height may not fit but i can change it. the trans is aod will the tranfercase from the truck work in a bronco? im getting the entire truck.
  12. wesleydax

    engine and trans swap questions

    well i have searched and not had much luck on finding answers. but when you dont know what your talking about it makes it harder to search. I have decided to swap my worn out 302 and 3 speed auto for a 5.0 with od trans. I have read about the explorer motor and trans but dont you need a...
  13. wesleydax

    coil voltage. ford but not bronco

    helping a friend with his 70 mustang. its all stock except for the pertronix ignition and coil. the car has been running fine he drove it to fl and on the power tour. went to start it the other day and no go. it turns over but will not start. The spark looks weak so I checked voltage to the...
  14. wesleydax

    fishing rod / gun rack

    anybody have a good way to transport fishing rods? we trout fish alot in the summer and trying to figure out a way to store the rods when moving from place o place with out just throwing them in the back.
  15. wesleydax

    lift gate latches

    well i thought i took pictures of my lift gate latches but apparently you have to tell this stupid phone to save it. anyway, does anyone have a pic of where the roll pins go in the latch pins? i know where they dont go ;D
  16. wesleydax

    super celebration. cabins burnning????

    Hey just heard that the bear mountain resort (i think thats right)on wears valley that has several cabins is burning. so anyone that may have reservations there may want to check with them.
  17. wesleydax

    wiring and flashers (problem solved)

    I may have two issues, Anybody know where the right side marker lights get power from? left works right dont. i have traced wires and with out taking stuff apart cant find where they connect. tested all bulbs and there good also turn signals dont work. checking voltage the large flasher has 12v...
  18. wesleydax

    welding gas tank

    anybody welded a gas tank? I took mine off today and need to weld/braze a couple fittings in it. one for fuel return and one for transfer from aux tank. Ive drained it and removed the sending unit. was thinking if use some degreaser and steam cleaner to wash out inside, drain it and do my...
  19. wesleydax

    dash pad replacment

    Im looking at fixing my dash pad. The one i have is cracked. The foam is still in good shape. Im looking at the replacement cover vs the complete dash. has anyone used the replamcent cover? do you like it and does it fit good.
  20. wesleydax

    super celebration bronco condition

    Hey, what shape does your bronco need to be in to take part in the show? mines fair got a few small dents and dings. paints about 12y old just dont know if it needs to be flawless or just whatever.
Top