• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

302 cam choice?

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
The 351w will have a ridge about an inch tall behind the distributor location.
Basically the china rail (where the leading edge of the intake manifold sits on the block) is taller on a 351 than the 302/5.0 so you can see at a glance if it's the taller block of the 351.

Sounds like you may have an aftermarket block perhaps? I'm not up on my numbering either, but find it odd that there are no identifiers near the starter.
Be very cool if it's a 351 though.

Paul
 
OP
OP
la hi

la hi

Jr. Member
Joined
Feb 11, 2014
Messages
103
I apologize!!!

To all of those who said every block has an ID number and I said NO mine does not. I apologize. The block number is right where you said it was--above the starter. When I turned the block upside down I found it.
E3AE 6015 BA20 and a 4031 stamped under the number.
Please help decode it.
E =80's
3=83
A=full size ford
E=engine??
6015 is the part number
B=?
A=?
20 =?
What do you belive it means?
 
Top