Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Don't know if it's different for the 6, but if you're good it doesn't need to be too big of a hole. Oh and you also put the twin sticks in the factory hole as well. Maybe you can talk Monte into cutting it out for ya.;D
When I did mine I cut most of the tunnel top off - left about a 1" lip around the edge - then made a new cover to bolt on. Really makes the install and future access easier. Since the hardtop was off I used a chainfall to lift the trans/transfer case combo into position from above. Piece of cake.