• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

4R70W and speedometer

John Griswold

Full Member
Joined
May 3, 2010
Messages
210
Loc.
Medford, NJ
Is anyone running the 4R70W with a stock speedometer cable off the transfer case? Not worrying about the transmission function is there any reason why the stock speedometer shouldn't work like normal with stock cable off t-case?
 

spap

Bronco Guru
Joined
Jan 2, 2010
Messages
2,642
Mine is that way and fine, cable will be a little tighter since the trans is longer.
But works fine
 

JSBX

Contributor
Sr. Member
Joined
Mar 10, 2010
Messages
652
Mine works fine with the 4R70W and Dana 20 combo. I had to take the cable out of a clamp and pull a little slack.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Speedometer runs off the transfer case. Doesn't matter what transmission is in front of it. You could have no transmission and just a transfer case and the speedometer will still work.

The stock cable has enough slack in it for the couple inches the transfer case slides back.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
...and if for some reason you need a longer one (doubler let's say) you can get them in different lengths from local parts places too... support Bronco vendors first if you can! ;)
 
OP
OP
J

John Griswold

Full Member
Joined
May 3, 2010
Messages
210
Loc.
Medford, NJ
Yes, that's what I thought. Not getting any movement on my speedometer. I'll check connection on each end. Both seem to be fully in position but something not engaging.
Thanks
 
Top