I feel like I need a whole cluster of switches for this thing.
Converter
Up/ down shift
Alternate program
OD on/ off
yup.
With regards to the tuning - I'd recommend using a laptop with a USB->Serial adapter (unless you are using the USB optishift) and taking it out for a drive and do your tuning on the road.
Start with the default file,
1. Go 0 to 60 - note what you don't like
2. Tweak your settings
3. Save/Upload (you don't even need to turn the engine off)
4. Repeat until you like it
I've not found any reason for an offroad 2nd shift table. I'm either crawling in 4-low in first or 2nd or driving around normally in 2 or 4-hi.
When you go into 4-low, everything is going to get screwed up anyway because your output shaft sensor will be out of whack. (it will think you are going twice as fast as you are depending on your t-case ratio)