• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

66 170 dying

snick

Contributor
Full Member
Joined
Feb 5, 2015
Messages
158
I did search but have not come up with anything.

I just rebuilt my 1100 original carb. Prior to rebuilding the carb, the truck had sat for years. After rebuilding the carb, I made the adjustments from this website

http://www.carburetor-parts.com/Autolite-1100-Adjustments_ep_416.html.

I also drained all the old gas from the tank, and installed a new fuel filter. Then I hooked everything back up, it started right up on full choke but died when the choke was completely pushed in (no choke). I adjusted the screw on the carb to engage the throttle more and was able to get it to stay running with the choke off.

I took it for it's first drive in a long time around the block. I drove it for a couple blocks and then while I was in second gear going maybe 30mph it all of the sudden started stuttering and died. It then did this all the way back to my house. I have driven it more to try to get as much info as possible on the problem. Here's what I've noticed.

- seems to die and stutter when it's above 1/2 throttle
- I can usually save it from dying if I push in the clutch and feather the throttle

When I was taking the carb apart to rebuild it, when I first popped it open, I had it flipped and I lost the check valve balls onto the floor. I found 2 of the balls on the ground but the rebuild kit I got had 3, so I installed the 3 into the locations shown on the rebuild kit. I bought the kit off eBay and I know there are many versions of the 1100. Did the original 66 1100 have 2 or 3 check valve balls. And which locations should they be installed.

I did come across a thread on here (can't seem to find it now) that mentioned some part of the 1100 carb that can't be accessed/taken apart but can be a potential problem. With my problem, could this be the problem?

Any ideas/thoughts on the problem would be much appreciated?
 

norm02

Full Member
Joined
Feb 8, 2016
Messages
336
I did search but have not come up with anything.

I just rebuilt my 1100 original carb. Prior to rebuilding the carb, the truck had sat for years. After rebuilding the carb, I made the adjustments from this website

http://www.carburetor-parts.com/Autolite-1100-Adjustments_ep_416.html.

I also drained all the old gas from the tank, and installed a new fuel filter. Then I hooked everything back up, it started right up on full choke but died when the choke was completely pushed in (no choke). I adjusted the screw on the carb to engage the throttle more and was able to get it to stay running with the choke off.

I took it for it's first drive in a long time around the block. I drove it for a couple blocks and then while I was in second gear going maybe 30mph it all of the sudden started stuttering and died. It then did this all the way back to my house. I have driven it more to try to get as much info as possible on the problem. Here's what I've noticed.

- seems to die and stutter when it's above 1/2 throttle
- I can usually save it from dying if I push in the clutch and feather the throttle

When I was taking the carb apart to rebuild it, when I first popped it open, I had it flipped and I lost the check valve balls onto the floor. I found 2 of the balls on the ground but the rebuild kit I got had 3, so I installed the 3 into the locations shown on the rebuild kit. I bought the kit off eBay and I know there are many versions of the 1100. Did the original 66 1100 have 2 or 3 check valve balls. And which locations should they be installed.

I did come across a thread on here (can't seem to find it now) that mentioned some part of the 1100 carb that can't be accessed/taken apart but can be a potential problem. With my problem, could this be the problem?

Any ideas/thoughts on the problem would be much appreciated?

You need the 3rd check ball for sure and then make sure your float is properly adjusted. Start with that and then report back.
 

ledslinger29

Full Member
Joined
Aug 31, 2016
Messages
190
X2 on the float level. Sounds like it's flooding


Sent from my iPhone using Tapatalk
 
Top