72 build for my wife

[Wild horse 75]

The big tee that sticks out is where you should take the vacuum from. Those switches are actually in coolant so you could remove them and just plug the holes with pipe plugs.

 

[micked]

The big tee that sticks out is where you should take the vacuum from. Those switches are actually in coolant so you could remove them and just plug the holes with pipe plugs.

Thanks!! I’ll do that! Appreciate it!!


Sent from my iPhone using Tapatalk

 

[micked]

Full-size 9” tacked in
Need to mock up the shock mount tack them in then pull the rear end out and finish weld the perches and lower shock mounts


Sent from my iPhone using Tapatalk

 

[micked]

Got new parking brake cables installed


Sent from my iPhone using Tapatalk

 

[broncoitis]

Great job so far! Keep it up!

 

[micked]

Got adjustable track bar from duff on
Got dual heim joint steering linkage from duff on
Need to bleed the brakes
Ned to wire the line for new proportioning valve
Need to get rear pinion yoke off and put the new one in, but need to make a big ass breaker bar that I can bolt to the joke… it won’t budge cuz the little play when trying to unbolt that bitch
Then I can hook drive shaft up and take her for a spin

Looking to take it to a place to get a legit alignment … toe in/out, track bar etc … any recommendations for getting alignment in San Diego area?


Sent from my iPhone using Tapatalk

 

[micked]

Got the pinion yoke off by using a piece of steel and fashioning it to the yoke do the truck wouldn’t move

Bleed the breaks but one of the rear wheel cylinders is bad need to order one

Drove it around and it drives nice with the long arms and dual heims and track bar riser with custom track bar


Sent from my iPhone using Tapatalk

 

[micked]

New 17” wheels on 37x12.5x17 bfg all terrains

Sent from my iPhone using Tapatalk