• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

77 9" swap question

snick

Contributor
Full Member
Joined
Feb 5, 2015
Messages
158
Couldn't find anything when I searched - I have a 69 bronco that I'm interested in swapping a complete drum to drum EB 77 9" into. Assuming the gearing is the same as my D44, will the 77 9" be a straight swap or is there anything that is different from the 69 9". Also, all 76-77 9" rears were big bearing, correct?
 
Last edited:

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Straight swap.
'77 is a big banjo, the big meaty housing. The good one.
Someone else will have to answer about the bearing sizing.
 

spap

Bronco Guru
Joined
Jan 2, 2010
Messages
2,642
The 77 most likely has a limited slip too. See if it has the tag still on it
That will give you the gear ratio and if it has a LS
 

OB Bronco

Sr. Member
Joined
Apr 25, 2012
Messages
443
Loc.
Orange Beach
If the Bronco was originally a 6 cyl it would have 4.10 gears. Check it by looking at the tag on the rearend or by spinning a tire and counting how many times the yoke turns. If it was originally a V8 it would have been 3.50 from the factory. Same as the '77.
 

Crawdad

Bronco Guru
Joined
Feb 16, 2011
Messages
3,635
The 77 banjo rearend is a rare piece. It's stronger and has wider drums. I pd $400 for mine so it's not cheap. I have a 4.11 hoghead out of an earlier model bronco. My plan is to swap out the stock 77 3.50 for the 4.11 hoghead in the future.
 
Top