• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

9" bearings. which ones

wesleydax

Full Member
Joined
Apr 12, 2011
Messages
331
I have an axle seal leaking and obviously need to replace it. Can an of y'all tell by the picture which bearing I have? I think its large bearing but its been a good 25 years since I've been in to this thing. Is there an up graded bearing and seal now. I do remember last time having to put the seal on and then the bearing. I have been searching old threads and am more confused now than when I started. I would like to order whatever I need before I start. Also would you replace the inner bearings as well? Id does have a roaring noise and Im sure its a rear bearing,and that i remember only one outter bearing has ever been replaced.
 

Attachments

  • IMAG0035.jpg
    IMAG0035.jpg
    40.8 KB · Views: 124

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,553
Yes large bearing replace the axle bearing
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,553
two kinds of bearing a tapered oil bath bearing or a sealed bearing. I like the tapered bearing.
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
I I do remember last time having to put the seal on and then the bearing...

Also would you replace the inner bearings as well?
I believe the ID of the standard ball bearing axle bearing and the tapered roller bearing (SET20) are different. The standard roller bearings are sealed and have the axle seal inboard of the bearing. The SET20 bearings have the seal outboard and the bearing is lubricated by the gear oil, so you have to slip the seal onto the axle shaft before pressing on the bearing.

As much as I can understand wanting to order the parts ahead of disassembling the axle shafts, your best bet would be to pull it apart first to make sure of what you have.

There really are no "inner' bearings other than the carrier bearings. Replacing those would require removing the third member, replacing bearings and setting up the gear backlash. Unless you really suspect a problem, I would leave it alone.
 
OP
OP
wesleydax

wesleydax

Full Member
Joined
Apr 12, 2011
Messages
331
im going to take mine apart first like you said. If i have the tapered bearing with seal can the set 20 sealed bearing be used? or do i have to go back with the seal and bearing? i know i making this more complicated than it has to be but if theres something better thats the way i want to go
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
im going to take mine apart first like you said. If i have the tapered bearing with seal can the set 20 sealed bearing be used? or do i have to go back with the seal and bearing? i know i making this more complicated than it has to be but if theres something better thats the way i want to go
You don't really get an option. The bearing you will use is what you have now, because of the difference in bearing ID. That means the axle is either made for a tapered roller bearing or a sealed ball bearing. The only "choice" you get is the brand/quality of the bearing you buy as a replacement.
 
OP
OP
wesleydax

wesleydax

Full Member
Joined
Apr 12, 2011
Messages
331
i got disc rear. and no motivation at all today or i would have torn it down already. Thanks guys for the help.
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
i know my retainers are bowed and stuff would these work as replacements and still hold the seal

http://www.strangeengineering.net/m...-plates/early-big-ford-retainer-plate-ea.html
They should. Or... Wild Horses has those same retainers for $12 each. I used WH retainers for the standard ball bearings and then reused the same retainers when I installed new axles with the SET20 bearings.
http://www.wildhorses4x4.com/product/Heavy_Duty_Retainer

... and no motivation at all today ...
Now at 105° here in Phoenix. I lost my motivation at 102°!
 
Top