• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

adjusting new lifters

wesleydax

Full Member
Joined
Apr 12, 2011
Messages
331
I'm putting new lifters and rockers in tomorrow and I don't remember how to adjust them. It's all stock and going back with stock stuff. The studs have the shoulder on them. Best I can remember is tighten them all way down and torque to 20ft lb. Does that sound right
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Stock positive stop type valve train is non adjustable so Basically you should be able to just torque them down to spec. I think it is suggested to do each set of valves when that cylinder is on TDC. That will ensure you dont get false readings from the valve springs pushing back
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
my stock rockers in my 68-289 say to put cylinder on TDC then toghten till you cant spin the pushrod by hand then go another 3/4 turn
 
Top