• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Another Bukin Suspension Mod

OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
The rear suspension cycled at 21.5" so we should end up with about 19.5" of rear travel with the 4 link.

Coilovers are ordered, and we're waiting until they come in to build the upper shock mounts for better accuracy on the mounting points. We should be able to have it together by mid week.

Next, we'll start on the front suspension. :D

Heres some more pics from today. The inner fenders will still need more trimming, but the holes in the floor for the cage tie in came out right on the money:cool:
 

Attachments

  • IMG_20131024_163618_771.jpg
    IMG_20131024_163618_771.jpg
    119.5 KB · Views: 219
  • IMG_20131024_163717_820.jpg
    IMG_20131024_163717_820.jpg
    134.8 KB · Views: 207

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
I'm curious as to how much trimming you'll be doing on the rear fender wells. I had to run 4.5" bump stops on the rear to keep the 35's from rubbing. And that's with a 2" body lift. Seems like you'll need bigger wells to take advantage of what your doing.
Can't wait to see the rear suspension together, it looks great. Keep us updated.
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
I'm curious as to how much trimming you'll be doing on the rear fender wells. I had to run 4.5" bump stops on the rear to keep the 35's from rubbing. And that's with a 2" body lift. Seems like you'll need bigger wells to take advantage of what your doing.
Can't wait to see the rear suspension together, it looks great. Keep us updated.

Thanks garberz. I'll take some measurements with the next set of pics. I'm going to be running 35's to start with, and a 2" b/l as well. We didn't calculate that I would need to rebuild the inner fender wells unless I ran 37's. I just got new tires and new bead locks about a year ago, so I won't be changing those out any time soon.
 

TwoDalesDad

Bronco Guru
Joined
Jul 19, 2011
Messages
1,515
Ihave to say I am on pin and needles waiting to see more pictures. I have wanted to do a bronco like this for years partly because I'm an old desert racer at heart, and partly because people say it can't be done. I have a bunch of parts collected over time for this type of mod, including another bronco tub with frame. One of these days I will get back to the project bronco....In the mean time.....send more pictures.....broncobill67
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Some more progress!

* Upper and lower link mounts on the rear housing and frame are complete
* Upper and lower arms are complete
* More cage work done, still need upper shock mounts
* Final trimming of the floor for full bump

..continued
 

Attachments

  • Tube Frame Complete.jpg
    Tube Frame Complete.jpg
    103.9 KB · Views: 205
  • Upper Links @ Housing Complete.jpg
    Upper Links @ Housing Complete.jpg
    93.4 KB · Views: 199
  • Lower Link @ Hsg Complete.jpg
    Lower Link @ Hsg Complete.jpg
    84.6 KB · Views: 185
  • Full Bump.jpg
    Full Bump.jpg
    79.7 KB · Views: 192
  • Upper Links @ Full Bump.jpg
    Upper Links @ Full Bump.jpg
    78.4 KB · Views: 211
  • Cage Side Before Shock Mounts.jpg
    Cage Side Before Shock Mounts.jpg
    143.6 KB · Views: 208
  • Cage Rear Before Shock Mounts.jpg
    Cage Rear Before Shock Mounts.jpg
    149.4 KB · Views: 209
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Then we put it together, and wait for the custom King coilovers to arrive
 

Attachments

  • 4 Link Install 4.jpg
    4 Link Install 4.jpg
    85.8 KB · Views: 197
  • 4 Link Install 2.jpg
    4 Link Install 2.jpg
    74.9 KB · Views: 223
  • 4 Link Install 1.jpg
    4 Link Install 1.jpg
    70.1 KB · Views: 254
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Ihave to say I am on pin and needles waiting to see more pictures. I have wanted to do a bronco like this for years partly because I'm an old desert racer at heart, and partly because people say it can't be done. I have a bunch of parts collected over time for this type of mod, including another bronco tub with frame. One of these days I will get back to the project bronco....In the mean time.....send more pictures.....broncobill67

Hey TTD. Glad you're enjoying the build. I'm an old desert racer at heart too, and I'm excited about being able to do this. Out of curiosity, we were wondering what people were saying couldn't be done? Thanks!
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Rear upper shock mount assemblies are done!
 

Attachments

  • IMG_945138562567907.jpeg
    IMG_945138562567907.jpeg
    86 KB · Views: 183
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
The rear upper mounts are tacked in and shocks installed to check clearances and travel (plus a dummy in place of the bypass for measurements).
 

Attachments

  • SHOCK TOWER 11.7.13.jpg
    SHOCK TOWER 11.7.13.jpg
    115.9 KB · Views: 274
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Shock towers done..
 

Attachments

  • SHOCK TOWERS COMPLETE 11.7.13.jpg
    SHOCK TOWERS COMPLETE 11.7.13.jpg
    104.6 KB · Views: 178
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Thanks 08

here are some pics from last night. Everything articulates nicely with no binding. The rear cut-out for the coilovers and bypass measures exactly 12" X 8". We trimmed too far forward by a couple inches (not included in the measurement) which will have to be plated.

We also came up with a good use for the old aux tank fill hole. ;D
 

Attachments

  • Rear Artic.jpg
    Rear Artic.jpg
    110.5 KB · Views: 266
  • PS Artic.jpg
    PS Artic.jpg
    105.4 KB · Views: 244
  • DS Artic..jpg
    DS Artic..jpg
    95.5 KB · Views: 263
  • Bottle Opener.jpg
    Bottle Opener.jpg
    62.2 KB · Views: 722

nlped

Sr. Member
Joined
Jun 4, 2009
Messages
376
Yeah, I'd say it articulates just fine... WOW!!!

And now I know what to do with that dang auxiliary gas hole... Good beer!
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
We're sending the upper and lower arms out to powdercoat next week. I've decided to go with a dark gun metal hammered gray. The lowers look like pieces of art thanks to Loco Jones' TIG and design talents so I don't want lose that aspect by using too much of a hammered effect.
We may be headed to the 1000 as a last minute decision if enough sponsorship $ can be had. The car is ready but we need another $9k by next Wed. Anyone want to co-drive? PM me. This year the 1000 is a loop back to Ensenada so no driving back from the tip.
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
A pic quad from last night.
 

Attachments

  • 1453232_687137274650768_575925286_n.jpg
    1453232_687137274650768_575925286_n.jpg
    137.4 KB · Views: 278
Top