• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Another Bukin Suspension Mod

swyman

Jr. Member
Joined
Sep 28, 2009
Messages
137
Loc.
Blissfield
Bukin, I see you used johnny joints on your links. My cousin wants to sell me those instead of heims for my setup. I know they are greasable and rebuildable which is a plus but how long do heim joints last? Do they wear out fast being that you can't really lube them other than spraying them?
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Bukin, I see you used johnny joints on your links. My cousin wants to sell me those instead of heims for my setup. I know they are greasable and rebuildable which is a plus but how long do heim joints last? Do they wear out fast being that you can't really lube them other than spraying them?

The race guys replace the heims after each race, so it would depend on how hard you are on them. They aren't serviceable, and when they develop play, they need replacing.These Johnnys are a new thing for me, so I can't really say how many wheeling hours you can put on them until they need rebuilding. Like you stated, the beauty of them besides being able to service is being able to rebuild. They will save time and money in the long run
 

swyman

Jr. Member
Joined
Sep 28, 2009
Messages
137
Loc.
Blissfield
Sounds like a good route to go! Just don't seem like they would articulate as well but I won't be near any rocks anyway! Maybe a off chamber jump once and a while!
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
The Johnny's are wristed at the attachment point which gives them full mobility. They worked great when I did some crawling a couple weeks ago.

Sent from my DROID RAZR HD using Tapatalk 4
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Finally finished applying the POR 15 to the cage. I brushed it on. It takes forever to dry, so it would be hard to do 2 coats in a day. One coat is a big job in itself. If you use it, don't get any on ya!.

When it's dry and cured onto the metal it's like a powdercoated finish. If you want to paint over it, you need to scuff it. I'm going to leave it for now. I've already gone over the cage once with the clean-up wipe down with acetone, once with the metal etcher, once with water to sponge off and neutralize the etcher, and twice with the POR 15.:)
 

Attachments

  • IMG_20140322_144207_258.jpg
    IMG_20140322_144207_258.jpg
    131.7 KB · Views: 159
  • IMG_20140322_144240_823.jpg
    IMG_20140322_144240_823.jpg
    125.2 KB · Views: 161
  • IMG_20140322_144436_919.jpg
    IMG_20140322_144436_919.jpg
    58 KB · Views: 141

broncoitis

Bronco Guru
Joined
Jul 23, 2010
Messages
4,449
Finally finished applying the POR 15 to the cage. I brushed it on. It takes forever to dry, so it would be hard to do 2 coats in a day. One coat is a big job in itself. If you use it, don't get any on ya!.

When it's dry and cured onto the metal it's like a powdercoated finish. If you want to paint over it, you need to scuff it. I'm going to leave it for now. I've already gone over the cage once with the clean-up wipe down with acetone, once with the metal etcher, once with water to sponge off and neutralize the etcher, and twice with the POR 15.:)

Bukin, the truck is sick! Love every bit of the prerunner style. However, the POR-15 that is so glossy and beautiful now isn't gonna stay that way for long! You need to put some sort of glossy paint over the POR-15. POR-15 is UV sensative and that will turn the coating a chaulky looking gray over time just so you know. Good luck and the truck is awesome! ;D
 

SSDDBRONCO

Bronco Guru
Joined
Nov 12, 2009
Messages
2,172
Loc.
Los Angeles
Bukin, the truck is sick! Love every bit of the prerunner style. However, the POR-15 that is so glossy and beautiful now isn't gonna stay that way for long! You need to put some sort of glossy paint over the POR-15. POR-15 is UV sensative and that will turn the coating a chaulky looking gray over time just so you know. Good luck and the truck is awesome! ;D

X2 I was just going to say that. Throw a coat of some spray paint over that POR-15 and you wont have to deal with future fading. POR-15 takes a good while to dry but that shit is tough as hell!!
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Bukin, the truck is sick! Love every bit of the prerunner style. However, the POR-15 that is so glossy and beautiful now isn't gonna stay that way for long! You need to put some sort of glossy paint over the POR-15. POR-15 is UV sensative and that will turn the coating a chaulky looking gray over time just so you know. Good luck and the truck is awesome! ;D

X2 I was just going to say that. Throw a coat of some spray paint over that POR-15 and you wont have to deal with future fading. POR-15 takes a good while to dry but that shit is tough as hell!!

Thanks! Good to know, thanks for the tips big time. I was originally planning on applying some Rustoleum hammered black over the POR-15. I may get it done before the NORRA race, but if not, I can always do it later and at least it will be protected.
 

broncoitis

Bronco Guru
Joined
Jul 23, 2010
Messages
4,449
Bukin, what antenae do you have on the truck? I have been trying to find a smaller mast to put on mine and fill in that hole!!!! I like the looks of yours and was wondering if you remember where you sourced it from. Thanks! ;D
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Man I got that antenna about 15 years ago, but I don't remember where. You can pick one up on eBay for about $10. I just did a search for rubber car antenna

Sent from my DROID RAZR HD using Tapatalk 4
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
I was talking to a buddy today who is linking the rear of his eb and running a 14 c/o and 16in bypass. I think you are as well. He has moved his axle back 6-7 inches and plans on cutting extensively to get the most possible uptravel. He also plans on putting the shocks on the lower links to get more travel like you did, but probably have a greater distance in between the shocks and axle due to wheels lengthening. What kind of numbers do think he could achieve being his drive shaft will be longer? I was thinking 20-22 maybe possible? Lowering the transfercase be of any help with driveline angles or plunge?
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Hey 68, I'm getting 18+ travel so if he's stretching the rear that far it should be a safe bet that he gets at least 20" without even doing the geometry. I don't think he will need to change the drive angle either for those numbers. Is he running a high pinion? That would help as well as obviously running a CV joint.
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
I think he,has a cv up at the transfercase. The 3rd member is a standard low opinion 9in. I also told him to get rid of the frame under the body for more uptravel.
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
I also told him to get rid of the frame under the body for more uptravel.

That's what I did for the extra up travel, then tubed it out to the back. If he's going as far as to cut out the inner fenders he will also have to cut out the floor for the upper arms and pumpkin clearance at full bump like I did. Then he should be in good shape.
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
He's planning on cutting away wherever need be. I told him about the floor. Are you running a rear sway bar? If so, have any pics?
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
I don't have the rear sway bar installed yet. I'm starting with a Currie. We'll hopefully be working on that next week, and I'll post pics.
 
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
The rear sway bar assy. Is fabbed and installed. I'll be testing this weekend to see how it performs.
 

Attachments

  • IMG_165787307143890.jpeg
    IMG_165787307143890.jpeg
    137 KB · Views: 202
OP
OP
Bukin 67

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
Looks good! Be sure to give us the results....

I'll leave out all the bad stuff of course ;D

We leave 2 weeks from today for the NORRA 1000 and I haven't even finished testing. There's so many thing$ to add to make a truck race legal (and race worthy) from a simple pre-runner. It's come a long way since last Sept. Basically, take the time frame you estimated and double it, minimum - same with expenses :eek: ;)
 
Top