Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Bronco frame flexes which leads to this problem. It's why I went with a copper radiator. More resistant to flex cracks and easier to fix on the trail/road.
What do you guys do with your radiators? I have had a RD radiator for over ten years and no leaks and nearly that long in another vintage vehicle with no problems. You guys are scaring me.
Nope, never had an issue with electrolysis. Never use anything other than 50/50 premix coolant. I used to have crazy hard water that would corrode anything, so I just quit adding water to concentrate, never had an issue.
I have used a 50/50 mix high quality antifreeze, sacrificial anode, and ground strap on my aluminum radiators. After 15 years I am still good on my RD aluminum radiator. I will note that I had to replace the sacrificial anode as it did indeed sacrifice itself after 12 years.
I have used a 50/50 mix high quality antifreeze, sacrificial anode, and ground strap on my aluminum radiators. After 15 years I am still good on my RD aluminum radiator. I will note that I had to replace the sacrificial anode as it did indeed sacrifice itself after 12 years.
Just the WH anode that comes attached to a radiator cap. For the ground strap, I added a short 14 gauge wire with terminal ends from the bottom of the radiator over to a convenient hole on the frame.
Just the WH anode that comes attached to a radiator cap. For the ground strap, I added a short 14 gauge wire with terminal ends from the bottom of the radiator over to a convenient hole on the frame.