• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Baumann Controller mounting location

zerostar2410

Sr. Member
Joined
May 19, 2009
Messages
612
I'm running the optishift/USshift/bauman controller for my 4R70W transmission and tired of seeing it dangling from under my dash. Where and how have you guys been mounting this little controller? I wanted to flush mount it to the dash in place of the stock radio somehow without seeing the wiring but not to sure how to go about doing that. Still want it to be visible so i can mess with the toggle and keep an eye on temps, error codes, etc.

Curious to see what other people have done with their controllers! PICS please.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
For the life of me I can't understand why Kevin and the gang at Bauman do NOT want anybody to be able to mount their controllers and have them look nice.

The controllers have wiring come out 3 sides of the controller AND the wiring is almost flush with the face making it extremely difficult to mount so you can read the LCD's, but then still be able to remove the plug-ins...

I've asked them every couple of years but they dont seem to have any desire to make them "mountable" for actual use??? Why not??
 

Qumanchew

Contributor
Full Member
Joined
May 16, 2018
Messages
317
Loc.
Kutztown PA
For the life of me I can't understand why Kevin and the gang at Bauman do NOT want anybody to be able to mount their controllers and have them look nice.

The controllers have wiring come out 3 sides of the controller AND the wiring is almost flush with the face making it extremely difficult to mount so you can read the LCD's, but then still be able to remove the plug-ins...

I've asked them every couple of years but they dont seem to have any desire to make them "mountable" for actual use??? Why not??

I couldn't agree with you more! I'm trying to figure out how to mount mine but haven't come up with any good ideas.
 

Mikesimp70

Full Member
Joined
Jun 20, 2017
Messages
341
I had the same dilemma. I had it out for break in period and then finally decided to tie it up under the dash and forget about it. They have nice functionality but poor presentation.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
I told Kevin...what good is 2, 4, or now 6 available separate tunes IF you can't even access your co troller because you can only zip tie it to wires under your dash or like mine, laying in my console!!

No access = worthless option
 

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
I told Kevin...what good is 2, 4, or now 6 available separate tunes IF you can't even access your co troller because you can only zip tie it to wires under your dash or like mine, laying in my console!!

No access = worthless option

I don’t have mine yet, but the instructions say that the tunes can be toggled through with a momentary switch. If that’s true, I plan to mount a switch in my console somewhere.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
But how will you tell which tune you're on?? Haha!!!

What if you go over a bump when hitting the momentary on botton??!! ...was I on #2 or #3...did it click to the next tune?? lol

Call him people...takes 2 min...tell them to up their game! :)
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
My older version was behind the speaker grill. You could see the LED through the grill opening. It was just 2 tunes and that was done with an on/off toggle switch.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Broncobowsher...did you have the selector protrude thru the spkr grill slotsm
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
It was a remote switch on the center console. Remember, it was an older version. Back when they only had one model.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
OK, didn't know they had a version older than mine! 10yrs old.

$1300 for the new 6r80 controller...I'm in sticker shock!!
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
I had two. First was bought in '02 the next in '04. Two different projects. The original Baumanator was a hobby level project box. It only had a single LED that would change color based on gear selected, green, off, red, amber.

I talked with Greg at SEMA last year. They had just got the first 10-speed in and sort of running. It is good to see that he keeps advancing the product.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
OK..waaaay older than mine!

I talked with him in the fall of '16 when I was doing my suspension build about moving to the 6r80.

Would have been the perfect time for me to do all the frame, suspension, DS angles and mods to do it all right once...instead of my normal way which is build, rebuild, build again as new tech comes into our Bronco hobby.

They weren't done yet with the 6r80 controller and had expected it by Christmas...glad I didn't wait as new stuff usually takes longer to get on the market than anyone and everyone ever figures
 

bronco loco

It never ends
Joined
Nov 12, 2005
Messages
2,735
Loc.
Long Island New York
Optishift mounted.
 

Attachments

  • 12381t_1.jpg
    12381t_1.jpg
    3.5 KB · Views: 171
  • 20191025_000543.jpg
    20191025_000543.jpg
    80.5 KB · Views: 138
  • 20191025_000558.jpg
    20191025_000558.jpg
    105.8 KB · Views: 151

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,201
I told Kevin...what good is 2, 4, or now 6 available separate tunes IF you can't even access your co troller because you can only zip tie it to wires under your dash or like mine, laying in my console!!

No access = worthless option

They are designed to not be in view but give you access to the programs. It is up to you to add the extra switches to do so. We did this for a customer with 2 programs. I had 2 push buttons made that light up when engaged and they are labeled as to the function. One is OD cancel and the other is Tow. No reason to have the controller out in view. If you need to monitor temps add a gauge that is far easier to read than the display is. Ive never seen a manufactured vehicle with all of that information and manipulation of control at your fingertips and I am certain it is for good measure. If you want to get super technical then upgrade to the new HDX by Dakota Digital. You have your standard gauges plus tach and you can program in multiple trans temps if you wish as well as tire monitoring and several other gauges.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
I added the OD and TC switches years ago.

I run a separate oil temp guage.

Don't have any interest in Dakota OR tire pressure gauges...

This is for ease of switching tunes, etc. Having to dig thru the console or up under the dash or where the heck you have to literally HIDE the display with wires protruding out 270 degrees from the display is ridiculous for a modern day, sophisticated control device...

99.9% of the public do not want to do anything except drive their car and operate their phone while doing so. Probably 85% of that group wouldn't know or care about the technical aspects of what the Baumann can do and that's why car manufacturers don't offer something like this to the public...besides the fact that the public would probably destroy the trans by changing the parameters.

So yes, I'd still like to mount it so I don't have to pull a small display out of a hidden spot with 2 dozen wires attached to it (sticking out in ALL directions) to be able to make an adjustment ...or two.
 

desertguy76

New Member
Joined
Mar 22, 2018
Messages
33
Loc.
Norco, California
I am putting mine in the glove box but even that is a PITA. The way the plugs are it is pretty much in there backwards and will need to be pulled out to see.
 
Top